C175-16 and C175-20 Engines for Off-Highway Trucks Caterpillar


Turbocharger

Usage:

797F LAJ


Illustration 1g03180236

Table 1
Specifications for the 364-3729 Turbocharger Gp and the 364-3730 Turbocharger Gp 
Item  Qty  Part  Specification Description 
12  293-5490 Bolt  Lubricate threads with Loctite C5-A Copper Anti-Seize. 
Tighten the bolts to 40 ± 3 N·m (30 ± 2 lb ft)
372-5858 Band Clamp  Lubricate the threads with Loctite 51102 Nickel Anti-Seize. 
Use the following procedure to tighten the clamp.
1. Tighten one of the nuts for approximately 17 turns until about 10 mm (0.40 inch) of bolt threads are exposed.
2. Tighten the other nut to 20 N·m (15 lb ft).
3. Tighten the first nut to 20 N·m (15 lb ft).
4. Tap lightly all around the clamp. Then tighten the first nut to 30 ± 2 N·m (22 ± 1.5 lb ft).
5. Then tighten the second nut to 30 ± 2 N·m (22 ± 1.5 lb ft).
6. Tap lightly all around the clamp again. Retighten both nuts to 30 ± 2 N·m (22 ± 1.5 lb ft).

Caterpillar Information System:

C13 Tier 4 Final Engines Engine Speed - Check
CB34B, CB34B XW, CB36B and CC34B Utility Compactors Belts - Inspect/Adjust/Replace
CB22B, CB24B, CB32B and CC24B Utility Compactors Water Tank Strainer - Clean and Inspect
CB34B, CB34B XW, CB36B and CC34B Utility Compactors Wheel Nuts - Tighten
CB22B, CB24B, CB32B and CC24B Utility Compactors Tire Inflation - Check
CB22B, CB24B, CB32B and CC24B Utility Compactors Towing the Machine
789D and 789D XQ Off-Highway Trucks Machine Systems Object Detection Box - Remove and Install
CB22B, CB24B, CB32B and CC24B Utility Compactors Parking Brake Manual Release
2012/12/19 A New Alternator Belt Guard And New Alternator Supports Are Used on C175 Off-Highway Truck Engines {1405, 7150, 7168, 7174}
789D and 789D XQ Off-Highway Trucks Machine Systems Camera - Remove and Install
MH3049 Material Handler Machine Systems Main Control Valve - Remove and Install - Lower Valve
CB22B, CB24B, CB32B and CC24B Utility Compactors Stopping the Engine
CW14 Pneumatic CompactorEngine Supplement Alternator - Remove and Install
Procedure to Rework Hydraulic System on the AS4251C Asphalt Screeds {5050} Procedure to Rework Hydraulic System on the AS4251C Asphalt Screeds {5050}
559C and 579C Knuckleboom Loaders Hydraulic Oil Contamination - Test
R3000H Load Haul Dump Power Train Relief Valve (Torque Converter Outlet)
R3000H Load Haul Dump Power Train Gear Pump (Torque Converter Scavenge)
R3000H Load Haul Dump Braking System Pressure Switch (Parking Brake Oil)
988K XE Wheel Loader Systems Foot Brake Control
R3000H Load Haul Dump Steering System Pilot Valve (STIC Steering)
2012/10/16 The Service Wiring Group Has Been Updated on 777G Off-Highway Truck {1408, 7513}
C7.1 Industrial Engine Inlet Air Control - Remove - NRS Inlet Air Mixer
C7.1 Industrial Engine Inlet Air Control - Install - NRS Inlet Air Mixer
C7.1 Industrial Engine Fuel Injection Pump - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.