Oil Level Gauge (Dipstick) Marks For 3116 Marine Engines{1326}
Usage:
The oil level gauge for 3116 Marine Engines is NOT calibrated at the factory. The chart and illustration identify the correct marks for the tilt angle the engine is mounted. Mark the oil level gauge after installation of the engine. Oil refill capacity of the 3116 Marine Engine is 25 Liter (26 U.S. qt) with a filter change. A positive tilt angle indicates that the front of the engine is raised.
Oil level gauge marking.
Caterpillar Information System:
1990/04/23 New Crankcase Side Cover Use With Centrifugal Oil Filter Group{1328}
1990/04/23 New Rocker Arm Assemblies Have New Inserts And Buttons{1123}
1990/04/23 Part Numbers For Polyvee Belts From Original Equipment Manufacturers (OEM's){1357}
1990/04/09 What's Your Answer?{0315,0114,0785,1400}
1990/04/09 Improvements, Maintenance and Troubleshooting Information For Electric Starting Motors{1453,7521,7524,7526}
1990/04/09 New Turbocharger Group For 3512 (24Z) High Speed Generator Set Engines{1052}
1990/04/02 What's Your Answer?{0315,1000,1250,3000}
1990/04/02 Improved Filter Service Film For Duplex Fuel{1261,7557}
1990/04/02 Correct Torque Required For Bolts In Rear Gear Groups; Specification Omitted From Some Service Manuals{1204,1237,7568}
1990/04/02 New Valve Lifter Improves Oil Flow To Top Of Engine{1112,1119}
1990/04/02 New Flywheel Ring Gear Available To Improve Starter Engagement{1158,1454}
1990/04/02 Correct Replacement Of Forward Warning Horns{7402}
1990/04/30 Data Link Adapter For 3176 And 3406B PEEC (Programmable Electronic Engine Controls) Used In Navistar Trucks{1900}
1990/04/30 Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1121}
1990/05/07 Customer Interface Control Module Available {4490,7400}
1990/05/07 Fuel Return Line Added To Fuel System In Power Modules {1274}
1990/05/07 New Fuel Injector Group Used On Heavy Fuel Engines {1290}
1990/05/14 1U9800 Ultrasonic Wear Indicator Group For Measuring Undercarriage Wear On Track-Type Machines And Thickness Of Other Components{0787,4150}
1990/05/14 Parts Service Information For Pistons{1214,1225,1331}
1990/05/21 Check New 1W7578 And Remanufactured OR2530 Crankshafts For Burr On Thrust Face {1202,1203}
1990/05/21 Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21 New Valve Shield Used To Control Oil Slobber {1105}
1990/05/21 Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21 New Valve Assembly And Spacer Used In Fuel Transfer Pump Group {1256}