C9.3 Engines for Caterpillar Built Machines Caterpillar


Engine Oil Pan

Usage:

568 FM LL BRB


Illustration 1g02678556

Table 1
Specification for 348-8371 Oil Pan Gp, and 348-8185 Oil Pan Gp 
Item  Qty  Part  Specification Description 
The sealing surfaces of the oil pan shall be free of oil, debris, gasket material that is protruding, or any other sealant. The oil pan must be assembled and tightened to the cylinder block within 10 minutes of applying sealant. 
Apply Loctite blue RTV silicone to a bead of 5 mm (0.2 inch) at two places (2) on the connecting joint of the front housing (1) and the front of the cylinder block. 
Apply Loctite blue RTV silicone to a bead of 5 mm (0.2 inch) at two places (2) on the connecting joint of the flywheel housing (3) and the rear of the cylinder block. 
9X-6451 Drain Plug  Torque to 70 ± 15 N·m (52 ± 11 lb ft)
319-6234 Plug As  Torque to 90 ± 15 N·m (66 ± 11 lb ft)

Caterpillar Information System:

C3.4B Engines For Caterpillar Built Machines Electronic Control Module
C13, C15, and C18 Tier 4 Final Engines Engine Oil Filter Base
C9.3 Tier 4 Final Engines Engine Oil Filter Base
777G Off-Highway Truck Additional Messages
777G Off-Highway Truck Lubricant Viscosities - Fluids Recommendations
Procedure to Install an Updated Body Position Switch on the 777F Off-Highway Trucks{1408, 7258} Procedure to Install an Updated Body Position Switch on the 777F Off-Highway Trucks{1408, 7258}
773G and 775G Off-Highway Trucks Retarding
773G and 775G Off-Highway Truck Power Train Gear Pump (Transmission Charging, Scavenge) Pressure - Test and Adjust
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Temperature Sensor (Torque Converter Oil)
Improper Adjustment of the Hoist Relief Valve on Certain Off-Highway Trucks{5069, 5117} Improper Adjustment of the Hoist Relief Valve on Certain Off-Highway Trucks{5069, 5117}
2011/08/29 A New Cat® Optimized Suspension Seat is Now Available for Certain Off-Highway Trucks {7324}
Cat® Detect Object Detection for Off-Highway Trucks Washing System - Optional Equipment
2011/08/09 An Updated Procedure is Available for the Blade Tip Cylinder on Certain 120H, 120M, 12H, 12M, 140H, 140M, 143H, 14H, 160H, 160M, 163H, and 16H Motor Graders {5106, 7562}
2011/08/05 Improved Clamps are Now Used for the Turbocharger Outlet to ATAAC Pipe on Certain 140M and 160M Series 2 Motor Graders {1071, 1380}
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Tilt Cylinder (Logging Machines)
2011/10/06 New Display Module Gp is Available to Improve Low Brake Pressure Monitoring Performance {1408}
2011/08/11 New Hydraulic Coupler Bracket is Now Used for Certain Series B SSL/MTL/CTL {5057, 6129}
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Tilt Cylinder (Logging Machines)
2011/08/17 New 4.19 Firmware Is Now Available for CAES ultra Machine Control and Guidance Products {7604, 7620}
Cab Update Procedure for Certain Off-Highway Trucks{1408, 5057, 7301, 7960} Cab Update Procedure for Certain Off-Highway Trucks{1408, 5057, 7301, 7960}
Checking the High-Pressure Relief Valve for Leakage on C6.6 and C4.4 Engines{1288} Checking the High-Pressure Relief Valve for Leakage on C6.6 and C4.4 Engines{1288}
2012/01/11 Improved Wiring Is Used on C175-16 Engines in 793F and 793F AC Off-Highway Trucks {1408}
950M, 962M, 950M Z and 962M Z Wheel Loaders Turbocharger - Remove - First Stage Turbocharger
2011/08/09 Improved Console Plug on E-Series Backhoe Loaders is Available {7451}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.