Tilt Cylinder (Logging Machines)
Show/hide table
| |
| Illustration 1 | g02678769 |
Show/hide table
| Specification for 347-5544 Tilt Cylinder Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 114-0756 Bushing | Outside diameter is |
| Thickness is |
|||
| 2 | 1 | 170-9844 Buffer Seal | Lubricate the sealing lip of the buffer seal lightly with the lubricant that is being sealed. |
| 3 | 1 | 170-9860 U-Cup Seal | Lubricate the sealing lip of the U-cup seal lightly with the lubricant that is being sealed. |
| 4 | 1 | 165-9286 Lip Type Seal | Lubricate the sealing lip of the lip type seal lightly with the lubricant that is being sealed. |
| 5 | - | - | Apply green Loctite Retaining Compound 620 to wiper seal groove prior to assembly. |
| 6 | 2 | 360-3135 Bushing | Bore of the bushing before installation is |
| Installation depth of the bushing in the rod assembly is Installation depth of the bushing in the cap assembly is |
|||
| 7 | 1 | 147-5835 Special Locknut | Lubricate the threads and tighten to |
| A | 1 | 349-3633 Cylinder As | Bore is |
| B | 1 | 348-2295 Rod As | Diameter is |
| C | 1 | 349-3631 Head | Bore of the head over three lands is |
Caterpillar Information System:
2011/08/05 Improved Clamps are Now Used for the Turbocharger Outlet to ATAAC Pipe on Certain 140M and 160M Series 2 Motor Graders {1071, 1380}
2011/08/09 An Updated Procedure is Available for the Blade Tip Cylinder on Certain 120H, 120M, 12H, 12M, 140H, 140M, 143H, 14H, 160H, 160M, 163H, and 16H Motor Graders {5106, 7562}
C9.3 Engines for Caterpillar Built Machines Engine Oil Pan
C3.4B Engines For Caterpillar Built Machines Electronic Control Module
C13, C15, and C18 Tier 4 Final Engines Engine Oil Filter Base
C9.3 Tier 4 Final Engines Engine Oil Filter Base
777G Off-Highway Truck Additional Messages
777G Off-Highway Truck Lubricant Viscosities - Fluids Recommendations
Procedure to Install an Updated Body Position Switch on the 777F Off-Highway Trucks{1408, 7258} Procedure to Install an Updated Body Position Switch on the 777F Off-Highway Trucks{1408, 7258}
773G and 775G Off-Highway Trucks Retarding
773G and 775G Off-Highway Truck Power Train Gear Pump (Transmission Charging, Scavenge) Pressure - Test and Adjust
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Temperature Sensor (Torque Converter Oil)
2011/10/06 New Display Module Gp is Available to Improve Low Brake Pressure Monitoring Performance {1408}
2011/08/11 New Hydraulic Coupler Bracket is Now Used for Certain Series B SSL/MTL/CTL {5057, 6129}
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Tilt Cylinder (Logging Machines)
2011/08/17 New 4.19 Firmware Is Now Available for CAES ultra Machine Control and Guidance Products {7604, 7620}
Cab Update Procedure for Certain Off-Highway Trucks{1408, 5057, 7301, 7960} Cab Update Procedure for Certain Off-Highway Trucks{1408, 5057, 7301, 7960}
Checking the High-Pressure Relief Valve for Leakage on C6.6 and C4.4 Engines{1288} Checking the High-Pressure Relief Valve for Leakage on C6.6 and C4.4 Engines{1288}
2012/01/11 Improved Wiring Is Used on C175-16 Engines in 793F and 793F AC Off-Highway Trucks {1408}
950M, 962M, 950M Z and 962M Z Wheel Loaders Turbocharger - Remove - First Stage Turbocharger
2011/08/09 Improved Console Plug on E-Series Backhoe Loaders is Available {7451}
950M, 962M, 950M Z and 962M Z Wheel Loaders Turbocharger - Install - First Stage Turbocharger
2013/08/21 A New Oversized Cylinder Bore Liner Seal Insert Is Available for 3500 Engine Cylinder Block Salvage {1201, 7555}
2011/10/20 Revised Assembly Procedure for Engine Air Intake Tube Mounting on Certain Series E Backhoe Loaders {1071}