Hydraulic Tank and Filter - Assemble
组装步骤
- 将阀 (26) 安装到弹簧 (27) 。
Show/hide table
图 1 | g01354402 |
- 将弹簧 (27) 安装到滤网组件 (28) 中。 将滤网组件 (28) 安装到板 (29) 中。
- 安装板 (29) 。 安装螺栓 (25) ,以便安装板 (29) 。 均匀地安装螺栓 (25) 。
Show/hide table
图 2 | g01354401 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 定位机油油位导管 (24) 。 安装螺栓 (23) 。 拧紧螺栓 (23) 至扭矩为 10 N·m (89 lb in)。 安装板 (22) 。 安装螺栓 (21) 。
Show/hide table
图 3 | g01354398 |
- 安装传感器 (20) 。 拧紧传感器 (20) 至扭矩为 6 ± 1 N·m (53 ± 9 lb in)。 安装螺塞 (19) 。 安装排放管 (18) 。
Show/hide table
图 4 | g01354397 |
- 将 O 形密封圈 (17) 安装到螺纹接头组件 (16) 上。
Show/hide table
图 5 | g01354396 |
- 安装管组件 (16) 。 利用螺栓 (15) 固定管组件 (16) 。
Show/hide table
图 6 | g01354395 |
- 安装 O 形密封圈 (14) 。 安装双头螺柱 (13) 。 将双头螺柱 (13) 上紧到 35 ± 5 N·m (26 ± 4 lb ft) 的扭矩。 将弹簧销 (12) 装入双头螺柱 (13) 中。 安装隔套 (11) 。
Show/hide table
图 7 | g01354343 |
- 安装阀芯组件 (10) 。
Show/hide table
图 8 | g01354340 |
- 安装护圈组件 (7) 。 安装螺母 (9) 。 拧紧螺母 (9) 至扭矩为 10 ± 1 N·m (89 ± 13 lb ft)。 安装 O 形密封圈 (8) 。
Show/hide table
图 9 | g01354337 |
- 安装盖组件 (6) 。 安装螺母 (5) 。
Show/hide table
图 10 | g01354322 |
- 安装滤网 (4) 。 安装挡圈 (3) 。
Show/hide table
图 11 | g01354320 |
- 安装阀 (1) 。 安装盖 (2) 。
Show/hide table
图 12 | g01354315 |
End By: 安装液压油箱和滤清器。
Caterpillar Information System:
PL87 Pipelayer Machine Systems Hydraulic Tank and Filter - Disassemble
PL87 Pipelayer Machine Systems Hydraulic Tank and Filter - Remove and Install
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Differential and Bevel Gear (Center) - Assemble
PL83 and PL87 Pipelayers Machine Systems Boom Winch - Disassemble
966M and 972M Wheel Loaders Visibility Information
428F, 432F, 434F and 444F Backhoe Loaders Transmission Oil - Change
PL87 Pipelayer Machine Systems Governor and Brake Control - Remove and Install
422F, 428F, 432F, 434F and 444F Backhoe Loaders Radiator Core - Clean
PL87 Pipelayer Machine Systems Boom Winch Motor - Remove and Install
422F, 428F, 432F, 434F and 444F Backhoe Loaders Rollover Protective Structure (ROPS) - Inspect
PL87 Pipelayer Machine Systems Hook Winch Motor - Remove and Install
C7.1 Engines For Caterpillar Built Machines Acceleration Is Poor or Throttle Response Is Poor
Product Link - PL522/523 MID 161 - CID 3766- FMI 14
PL87 Pipelayer Machine Systems Cab - Remove and Install
773G and 775G Off-Highway Truck Sound Information and Vibration Information
Rework Procedure For Cab Harness As On Certain 777F Off-Highway Trucks{1408, 7301} Rework Procedure For Cab Harness As On Certain 777F Off-Highway Trucks{1408, 7301}
R1300G Load Haul Dump Cooling System Coolant (ELC) - Change
R1300G Load Haul Dump Cooling System Coolant Additive (DEAC) - Add
R1300G Load Haul Dump Transmission Oil Filter - Replace
C7.1 Engines For Caterpillar Built Machines Engine Cranks but Does Not Start
C7.1 Engines For Caterpillar Built Machines Engine Misfires, Runs Rough or Is Unstable
C7.1 Engines For Caterpillar Built Machines Engine Shutdown Occurs Intermittently
C7.1 Engines For Caterpillar Built Machines Engine Top Speed Is Not Obtained
C7.1 Engines For Caterpillar Built Machines Exhaust Has Excessive Black Smoke