Boom Winch - Disassemble
拆解步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 140-7742     | 套筒     | 2     |
B     | 2D-1201     | 吊环螺栓     | 2     |
C     | 1P-7405     | 吊环螺栓     | 1     |
D     | 1P-0510     | 冲头总成     | 1     |
E     | 138-7575     | 连杆支架     | 3     |
F     | 138-7573     | 连杆支架     | 2     |
G     | 5F-7369     | 拉拔器腿     | 2     |
8B-7556 | 齿座     | 2     | |
150-1782 | 十字挡块     | 1     | |
3H-0465 | 推拉工具盘     | 4     | |
1U-5230 | 手动液压泵     | 1     | |
360-6965 | 油缸     | 1     | |
H     | 1P-0520     | 冲头总成     | 1     |
开始:
- 拆下动臂绞盘。
- 拆卸驱动齿轮组件 (1) 。
Show/hide table
图 1 | g02670161 |
- 将挡圈 (7) 、止推垫圈 (6) 、齿轮 (4) 、轴承 (5) 和止推垫圈 (3) 从轴 (2) 上拆下。
Show/hide table
图 2 | g02671837 |
- 使用工具 (A) 和适当的起吊设备将绞盘组件定位到端上,注意马达端朝上。 绞盘组件和电缆的组合重量约为 421 kg (930 lb)。 不带电缆的绞盘组件重量约为 354 kg (780 lb)。
Show/hide table
图 3 | g02671958 |
- 以星形方式按一圈的增量松开螺栓 (8) 直至弹簧张力释放。 拆下盖 (9) 。
Show/hide table
图 4 | g02672427 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 拆下弹簧 (10) 。
Show/hide table
图 5 | g02672920 |
- 拆下调整螺钉。
Show/hide table
图 6 | g02673077 |
- 使用工具 (B) 和适当的撬杆拆下活塞 (12) 。
Show/hide table
图 7 | g02673120 |
- 将密封 (13) 和 (14) 从活塞 (12) 上拆下。
Show/hide table
图 8 | g02673297 |
- 拆下板 (15) 和摩擦盘 (16) 。
Show/hide table
图 9 | g02674059 |
- 拆下螺栓 (17) 、板 (18) 和挡圈 (19) 。
Show/hide table
图 10 | g02674076 |
- 将工具 (E) 和适当的起吊设备连接到毂 (20) 上。 轮毂 (20) 的重量约为 66 kg (145 lb)。 拆下轮毂 (20) 。
Show/hide table
图 11 | g02674397 |
- 卸下螺栓 (21) 和轴承壳体 (22) 。
Show/hide table
图 12 | g02674659 |
- 拆下挡圈 (23) 、轴承 (24) 和密封 (25) 。
Show/hide table
图 13 | g02674696 |
- 卸下轴承杯 (26) 。
Show/hide table
图 14 | g02675066 |
- 将工具 (C) 和适当的起吊设备固定在内行星齿轮组件 (27) 上。 内行星齿轮组件 (27) 的重量约为 23 kg (50 lb)。 拆下内行星齿轮组件 (27) 。
Show/hide table
图 15 | g02675077 |
- 拆下挡圈 (28) 然后定位内行星齿轮组件。 将齿圈轮毂 (29) 从内行星齿轮组件上拆下。
Show/hide table
图 16 | g02675118 |
Show/hide table
图 17 | g02675138 |
- 拆下 O 形密封圈 (32) 、轴密封 (30) 和滚针轴承 (31) 。
Show/hide table
图 18 | g02675176 |
- 拆下太阳齿轮轴 (33) 。
Show/hide table
图 19 | g02675236 |
- 拆下挡圈 (34) 。 从毂 (36) 上拆下齿圈 (35) 。
Show/hide table
图 20 | g02675257 |
- 将挡圈 (41) 从销 (38) 上拆下。 使用适当的黄铜冲头和适当的锤头将销 (38) 从壳体 (42) 上拆下。 拆下齿轮 (39) 、垫圈 (37) 和支重轮 (40) 。
注: 用各自的齿轮保持支重轮 (40) 和销 (38) 。
Show/hide table
图 21 | g02676317 |
- 将壳体 (42) 放置在适当的压具中。 使用工具 (D) 和适当的压具将衬套从壳体 (42) 上拆下。
Show/hide table
图 22 | g02676516 |
- 拆下主驱动轴 (43) 。
Show/hide table
图 23 | g02676577 |
- 使用工具 (E) 和适当的起吊设备重新定位绞盘组件,使终传动侧朝上。 绞盘组件的重量约为 295 kg (650 lb)。
Show/hide table
图 24 | g02683016 |
- 拆下螺栓 (44) 和盖 (45) 。
Show/hide table
图 25 | g02684276 |
- 将工具 (E) 和适当的起吊设备连接到行星齿轮组件 (46) 上。 行星齿轮组件 (46) 的重量约为 50 kg (110 lb)。 将行星齿轮组件 (46) 从壳体 (53) 上拆下。
Show/hide table
图 26 | g02684356 |
- 拆下销 (48) 两端的挡圈 (47) 。
Show/hide table
图 27 | g02686436 |
- 将行星齿轮组件定位到适当的压具中。 使用适当的压具拆下销 (48) 。 拆下齿圈 (49) 、垫圈 (51) 和支重轮 (50) 。
注: 使用各自的齿轮 (49) 和销 (48) 保持支重轮 (50) 。
Show/hide table
图 28 | g02686477 |
Show/hide table
图 29 | g02686518 |
- 拆下挡圈 (52) 。
Show/hide table
图 30 | g02686596 |
- 使用工具 (G) 将壳体 (53) 从中间轴 (54) 上拆下。
Show/hide table
图 31 | g02686617 |
- 连接工具 (F) 和适当的起吊设备以拆下壳体 (53) 。 壳体 (53) 的重量约为50 kg (110 lb)。 将壳体 (53) 从中间轴 (54) 上拆下。
Show/hide table
图 32 | g02686936 |
- 拆下挡圈 (55) 。
Show/hide table
图 33 | g02687136 |
- 使用适当的黄铜冲头和适当的锤头拆下轴承 (57) 。 使用工具 (H) ,卸下轴密封 (56) 。
Show/hide table
图 34 | g02687157 |
Caterpillar Information System:
966M and 972M Wheel Loaders Visibility Information
428F, 432F, 434F and 444F Backhoe Loaders Transmission Oil - Change
PL87 Pipelayer Machine Systems Governor and Brake Control - Remove and Install
422F, 428F, 432F, 434F and 444F Backhoe Loaders Radiator Core - Clean
PL87 Pipelayer Machine Systems Boom Winch Motor - Remove and Install
422F, 428F, 432F, 434F and 444F Backhoe Loaders Rollover Protective Structure (ROPS) - Inspect
PL87 Pipelayer Machine Systems Hook Winch Motor - Remove and Install
C7.1 Engines For Caterpillar Built Machines Acceleration Is Poor or Throttle Response Is Poor
PL87 Pipelayer Machine Systems Platform - Remove and Install
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Differential and Bevel Gear (Center) - Disassemble
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Differential and Bevel Gear (Center) - Remove and Install
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Differential and Bevel Gear (Front and Rear) - Remove and Install
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Differential and Bevel Gear (Center) - Assemble
PL87 Pipelayer Machine Systems Hydraulic Tank and Filter - Remove and Install
PL87 Pipelayer Machine Systems Hydraulic Tank and Filter - Disassemble
PL87 Pipelayer Machine Systems Hydraulic Tank and Filter - Assemble
Product Link - PL522/523 MID 161 - CID 3766- FMI 14
PL87 Pipelayer Machine Systems Cab - Remove and Install
773G and 775G Off-Highway Truck Sound Information and Vibration Information
Rework Procedure For Cab Harness As On Certain 777F Off-Highway Trucks{1408, 7301} Rework Procedure For Cab Harness As On Certain 777F Off-Highway Trucks{1408, 7301}
R1300G Load Haul Dump Cooling System Coolant (ELC) - Change
R1300G Load Haul Dump Cooling System Coolant Additive (DEAC) - Add
R1300G Load Haul Dump Transmission Oil Filter - Replace
C7.1 Engines For Caterpillar Built Machines Engine Cranks but Does Not Start