Hydraulic Tank and Filter - Disassemble
拆解步骤
开始:
- 拆下液压油箱和滤清器。
- 拆下盖 (2) 。 拆下阀 (1) 。
Show/hide table
图 1 | g01354315 |
- 拆下挡圈 (3) 。 取出滤网 (4) 。
Show/hide table
图 2 | g01354320 |
- 拆下螺母 (5) 。 拆下盖组件 (6) 。
Show/hide table
图 3 | g01354322 |
- 取下 O 形密封圈 (8) 。 拆下螺母 (9) 。 拆下挡圈组件 (7) 。
Show/hide table
图 4 | g01354337 |
- 拆下滤芯组件 (10) 。
Show/hide table
图 5 | g01354340 |
- 拆下隔套 (11) 。 拆下弹簧销 (12) 。 拆下双头螺栓 (13) 。 取下 O 形密封圈 (14) 。
Show/hide table
图 6 | g01354343 |
- 拆下螺母 (15) 。 拆下管组件 (16) 。
Show/hide table
图 7 | g01354395 |
- 将 O 形密封圈 (17) 从管组件 (16) 上拆下。
Show/hide table
图 8 | g01354396 |
- 拆下排油口 (18) 。 拆下螺塞 (19) 。 拆下传感器 (20) 。
Show/hide table
图 9 | g01354397 |
- 拆下螺栓 (23) 。 拆下机油油位导管 (24) 。 拆下螺栓 (21) 。 拆下板组件 (22) 和密封垫。
Show/hide table
图 10 | g01354398 |
- 均匀地拧松螺栓 (25) ,直到弹簧张力释放。 拆下螺栓 (25) 。 拆下板 (29) 。 拆下滤网组件 (28) 。
Show/hide table
图 11 | g01354401 |
Show/hide table
图 12 | g01354402 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 卸下弹簧 (27) 。 拆下阀 (26) 。
Caterpillar Information System:
PL87 Pipelayer Machine Systems Hydraulic Tank and Filter - Remove and Install
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Differential and Bevel Gear (Center) - Assemble
PL83 and PL87 Pipelayers Machine Systems Boom Winch - Disassemble
966M and 972M Wheel Loaders Visibility Information
428F, 432F, 434F and 444F Backhoe Loaders Transmission Oil - Change
PL87 Pipelayer Machine Systems Governor and Brake Control - Remove and Install
422F, 428F, 432F, 434F and 444F Backhoe Loaders Radiator Core - Clean
PL87 Pipelayer Machine Systems Boom Winch Motor - Remove and Install
422F, 428F, 432F, 434F and 444F Backhoe Loaders Rollover Protective Structure (ROPS) - Inspect
PL87 Pipelayer Machine Systems Hook Winch Motor - Remove and Install
C7.1 Engines For Caterpillar Built Machines Acceleration Is Poor or Throttle Response Is Poor
PL87 Pipelayer Machine Systems Platform - Remove and Install
PL87 Pipelayer Machine Systems Hydraulic Tank and Filter - Assemble
Product Link - PL522/523 MID 161 - CID 3766- FMI 14
PL87 Pipelayer Machine Systems Cab - Remove and Install
773G and 775G Off-Highway Truck Sound Information and Vibration Information
Rework Procedure For Cab Harness As On Certain 777F Off-Highway Trucks{1408, 7301} Rework Procedure For Cab Harness As On Certain 777F Off-Highway Trucks{1408, 7301}
R1300G Load Haul Dump Cooling System Coolant (ELC) - Change
R1300G Load Haul Dump Cooling System Coolant Additive (DEAC) - Add
R1300G Load Haul Dump Transmission Oil Filter - Replace
C7.1 Engines For Caterpillar Built Machines Engine Cranks but Does Not Start
C7.1 Engines For Caterpillar Built Machines Engine Misfires, Runs Rough or Is Unstable
C7.1 Engines For Caterpillar Built Machines Engine Shutdown Occurs Intermittently
C7.1 Engines For Caterpillar Built Machines Engine Top Speed Is Not Obtained