Engine and Transmission - Connect
连接步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 138-7575 | 连杆支架 | 1 |
| B | 2D-1201 | 吊环螺栓 | 2 |
| C | 308-3470 | 千斤顶台架总成 | 2 |
| D | 308-3471 | 千斤顶台架总成 | 2 |
- 将工具 (B) 和适当的起吊设备固定在变矩器和变速箱 (6) 上。 变矩器和变速箱 (6) 的重量约为 1393 kg (3070 lb)。 将变矩器和变速箱 (6) 连接至发动机 (8) 。
Show/hide table
 | |
| 图 1 | g02533756 |
Show/hide table
 | |
| 图 2 | g02537485 |
- 安装螺栓 (7) 。
Show/hide table
 | |
| 图 3 | g02537492 |
- 稍微升起变矩器和变速箱 (6) 。 拆卸工具 (C) ，然后安装工具 (D) 。
Show/hide table
 | |
| 图 4 | g02537500 |
Show/hide table
 | |
| 图 5 | g02538160 |
- 拆下工具 (A) 。
Show/hide table
 | |
| 图 6 | g02533346 |
- 安装管 (5) 。
Show/hide table
 | |
| 图 7 | g02537598 |
- 安装弯头 (3) 和夹子 (4) 。
Show/hide table
 | |
| 图 8 | g02537600 |
- 安装夹子 (2) 。
Show/hide table
 | |
| 图 9 | g02537616 |
- 连接管 (1) 。
Caterpillar Information System:
2570C and 2670C Wheel Feller Bunchers Engine Supplement Water Pump - Remove and Install
AP1000F Asphalt Paver Machine Systems Front Wheel Drive Manifold - Install
AP1000F Asphalt Paver Machine Systems Front Wheel Drive Manifold - Remove
2011/05/05 An Improved Hose is Available for Radiator and Oil Cooler Mounting Group {1380}
AS3301C Asphalt Screed Screed Plates
AS2302C Asphalt Screed Screed Plates
C175-16 and C175-20 Engines for Off-Highway Trucks Gear Group (Front)
797F and 797F XQ Off-Highway Truck Hydraulic Fan System Piston Motor (Hydraulic Fan) - Extra Retarding
2011/05/16 A New Gasket Is Used for the Water Lines on Certain C15 and C18 Machine Engines {1052, 1380}
563C and 573C Wheel Feller Bunchers Engine Supplement Clean Emissions Module - Remove and Install
C9.3 Engines for Caterpillar Built Machines Compression Brake - Install
C9.3 Engines for Caterpillar Built Machines Compression Brake - Assemble - Valve Assembly
2011/05/05 Updated Ring And Pinion Gear Sets For Improved Service Life {3256, 3258}
PL83 Pipelayer Mounting and Dismounting
2570C and 2670C Wheel Feller Bunchers Engine Supplement Electronic Control Module - Remove and Install
Procedure to Install the Rear Axle Oil Cooler on the 797F Off-Highway Truck {1365} Procedure to Install the Rear Axle Oil Cooler on the 797F Off-Highway Truck {1365}
PL83 Pipelayer Operator Controls
PL83 Pipelayer Mirror - If Equipped
PL83 Pipelayer Monitoring System
PL83 Pipelayer Operation Information
C175-16 Engine for 795F Series AC Off-Highway Trucks Gear Group (Front)
320D and 323D Excavators Machine System Specifications Shuttle Valve (Pilot Lines)
3524B and C175 Engines for Off-Highway Truck/Tractors Turbocharger
320D and 323D Excavators Machine System Specifications Swing Cushion Valve - Fine Swing