541 Series 2 and 552 Series 2 Track Feller Bunchers Caterpillar


Specifications

Usage:

541 2 F7D


Illustration 1g01167690
Typical Example


Illustration 2g01167692

Note: The dimensions will vary depending on the attached work tool.

Note: The dimensions will vary depending on the type of the machine (tilt or no tilt).

Table 1
Shipping Dimensions 
Weights and Measures  541 Track Feller Buncher  552 Track Feller Buncher 
Approximate Weight  29211 kg (75500 lb)  34382 kg (86500 lb) 
Overall Length (A)  9732 mm (387 inch)  9565 mm (381 inch) 
Overall Height (B)  4808 mm (189 inch)  4969 mm (196 inch) 
Width of Tracks (C)  3479 mm (138 inch)  3479 mm (138 inch) 
Width of Upper Structure (D)  3377 mm (134 inch)  3377 mm (134 inch) 
Height of Cab (E)  3740 mm (134 inch)  4060 mm (152 inch) 
Ground Clearance  872 mm (34.3 inch)  872 mm (34.3 inch) 

Note: Dimensions for 541 uses 610 mm (24 inch) track shoes. Dimensions for 552 use 711 mm (28 inch) track shoes.

Caterpillar Information System:

735B, 740B and 740B EJECTOR Articulated Trucks Engine Supplement Clean Emissions Module - Remove and Install
2011/07/01 Improvements to the Drive Motor Group on Certain Skid Steer Loaders {5058}
AP1000F Asphalt Paver Engine Starting with Auxiliary Start Receptacle
541 Series 2 and 552 Series 2 Track Feller Bunchers Safety Messages
AP500F Asphalt Paver Engine Starting with Jump Start Cables
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Screed Adjustment
2011/03/22 The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on Certain Engines {1260, 1261, 1262, 1263}
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Power Train Pressures
735B, 740B and 740B EJECTOR Articulated Trucks Engine Supplement Soot Antenna - Remove and Install
584 and 584HD Forwarders Power Train Articulating and Oscillating Hitch
Comfort Series Seat For Caterpillar Machines Optimized Seat Air Suspension with Air Compressor
2011/05/09 Additional Front Signal Lamps Are in Production on Certain Off-Highway Trucks {1430, 1432}
AP1000E and BG1000E Asphalt Pavers Machine Systems Screed - Remove and Install
AP1055E and BG1055E Asphalt Pavers Propel System Track Roller Frame (Mobil-Trac)
2011/03/18 Revised Piston Cooling Jets - Remove and Install for C175-16 and C175-20 Machine Engines {1214}
Rework Procedure For Brake Friction Discs, Brake Control Valves, and the Covers on Certain M Series Motor Graders{4251, 4265, 4267, 4269} Rework Procedure For Brake Friction Discs, Brake Control Valves, and the Covers on Certain M Series Motor Graders{4251, 4265, 4267, 4269}
541 Series 2 and 552 Series 2 Track Feller Bunchers Daily Inspection
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Ventilation Blower Wheel - Inspect/Clean
541 Series 2 and 552 Series 2 Track Feller Bunchers Alternate Exit
AP1055E and BG1055E Asphalt Pavers Machine Systems Final Drive Planetary - Remove
AP1055E and BG1055E Asphalt Pavers Machine Systems Final Drive Planetary - Install
541 Series 2 and 552 Series 2 Track Feller Bunchers Operator Controls
521B and 522B Track Feller Bunchers Monitoring System - Information about System Operation
541 Series 2 and 552 Series 2 Track Feller Bunchers Air Conditioning and Heating Control
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.