Clean Emissions Module - Remove and Install
拆卸步骤
开始:
- 升起发动机罩
- 将蓄电池断路开关转到断开位置。
- 拆下挡泥板 (1) 。
Show/hide table
 | |
| 图 1 | g02477298 |
- 断开线束组件 (2) 、燃油管路 (4) 和冷却液管路 (5) 。 拆下夹子 (3) 。
Show/hide table
 | |
| 图 2 | g02477305 |
- 拆下夹子 (6) 、夹子 (7) 和夹子 (8) 。
Show/hide table
 | |
| 图 3 | g02477311 |
- 断开线束组件 (9) 。 拆下螺栓 (10) ，然后重新定位烟尘传感器 (11) 。
- 断开软管 (12) 并拆下卡箍 (13) 。
Show/hide table
 | |
| 图 4 | g02477360 |
- 断开卡箍 (14) 。
Show/hide table
 | |
| 图 5 | g02477864 |
- 将适当的起吊设备连接到清洁排放模块 (15) 。 清洁排放模块 (15) 的重量约为 2087 kg (4600 lb)。
Show/hide table
 | |
| 图 6 | g02477950 |
- 拆下螺栓 (16) ，然后拆下清洁排放模块 (15) 。
Show/hide table
 | |
| 图 7 | g02478010 |
安装步骤
- 按与拆卸相反的顺序安装清洁排放模块 (15) 。
- 拧紧卡箍 (13) 至扭矩为 35 ± 2 N·m (26 ± 2 lb ft)
Caterpillar Information System:
2011/07/01 Improvements to the Drive Motor Group on Certain Skid Steer Loaders {5058}
AP1000F Asphalt Paver Engine Starting with Auxiliary Start Receptacle
541 Series 2 and 552 Series 2 Track Feller Bunchers Safety Messages
AP500F Asphalt Paver Engine Starting with Jump Start Cables
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Screed Adjustment
2011/03/22 The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on Certain Engines {1260, 1261, 1262, 1263}
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Power Train Pressures
735B, 740B and 740B EJECTOR Articulated Trucks Engine Supplement Soot Antenna - Remove and Install
584 and 584HD Forwarders Power Train Articulating and Oscillating Hitch
Comfort Series Seat For Caterpillar Machines Optimized Seat Air Suspension with Air Compressor
2011/05/09 Additional Front Signal Lamps Are in Production on Certain Off-Highway Trucks {1430, 1432}
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Seat
541 Series 2 and 552 Series 2 Track Feller Bunchers Specifications
AP1000E and BG1000E Asphalt Pavers Machine Systems Screed - Remove and Install
AP1055E and BG1055E Asphalt Pavers Propel System Track Roller Frame (Mobil-Trac)
2011/03/18 Revised Piston Cooling Jets - Remove and Install for C175-16 and C175-20 Machine Engines {1214}
Rework Procedure For Brake Friction Discs, Brake Control Valves, and the Covers on Certain M Series Motor Graders{4251, 4265, 4267, 4269} Rework Procedure For Brake Friction Discs, Brake Control Valves, and the Covers on Certain M Series Motor Graders{4251, 4265, 4267, 4269}
541 Series 2 and 552 Series 2 Track Feller Bunchers Daily Inspection
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Ventilation Blower Wheel - Inspect/Clean
541 Series 2 and 552 Series 2 Track Feller Bunchers Alternate Exit
AP1055E and BG1055E Asphalt Pavers Machine Systems Final Drive Planetary - Remove
AP1055E and BG1055E Asphalt Pavers Machine Systems Final Drive Planetary - Install
541 Series 2 and 552 Series 2 Track Feller Bunchers Operator Controls
521B and 522B Track Feller Bunchers Monitoring System - Information about System Operation