Improvements to the Drive Motor Group on Certain Skid Steer Loaders {5058}
- Skid Steer Loader:
- 216 (S/N: 4NZ1-UP)
- 216B (S/N: RLL1-6799)
- 216B2 (S/N: RLL6800-UP)
- 216B3 (S/N: JXM1-UP)
- 226 (S/N: 5FZ1-UP)
- 226B (S/N: MJH1-10574)
- 226B2 (S/N: MJH10575-UP)
- 226B3 (S/N: MWD1-UP)
- 228 (S/N: 6BZ1-UP)
- 232 (S/N: CAB1-UP)
- 232B (S/N: SCH1-2475)
- 232B2 (S/N: SCH2476-UP)
- 242 (S/N: CMB1-UP)
- 242B (S/N: BXM1-4225)
- 242B2 (S/N: BXM4226-UP)
- 242B3 (S/N: SRS1-UP)
Description of Change: Changes have been made that will improve the bolted joint for hystat motor mounting hardware. This improvement will enhance the reliability of this machine.
Adaptable To: Replace the current mounting hardware with 306-4247 Bolt and 1S-4305 Washer
Show/hide table
Item     | Qty     | Part Number     | Description     |
---|---|---|---|
1     | 20     | 306-4247     | Bolt     |
2     | 20     | 1S-4305     | Washer     |
Show/hide table
Illustration 1 | g02477358 |
(1) 306-4247 Bolt (2) 1S-4305 Washer |
These changes are adaptable to the following machines:
- 216 (S/N: 4NZ1-UP)
- 226 (S/N: 5FZ1-UP)
- 228 (S/N: 6BZ1-UP)
- 232 (S/N: CAB1-UP)
- 242 (S/N: CMB1-UP)
- 226B (S/N: MJH1-10574)
- 226B2 (S/N: MJH10575-UP)
- 242B (S/N: BXM1-4225)
- 242B2 (S/N: BXM4226-UP)
- 216B (S/N: RLL1-6799)
- 216B2 (S/N: RLL6800-UP)
- 232B (S/N: SCH1-2475)
- 232B2 (S/N: SCH2476-UP)
- 216B3 (S/N: JXM1-1287)
- 226B3 (S/N: MWD1-1556)
- 242B3 (S/N: SRS1-693)
- 216B3 (S/N: JXM1288-UP)
- 226B3 (S/N: MWD1557-UP)
- 242B3 (S/N: SRS694-UP)
Caterpillar Information System:
AP1000F Asphalt Paver Engine Starting with Auxiliary Start Receptacle
541 Series 2 and 552 Series 2 Track Feller Bunchers Safety Messages
AP500F Asphalt Paver Engine Starting with Jump Start Cables
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Screed Adjustment
2011/03/22 The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on Certain Engines {1260, 1261, 1262, 1263}
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Power Train Pressures
735B, 740B and 740B EJECTOR Articulated Trucks Engine Supplement Soot Antenna - Remove and Install
584 and 584HD Forwarders Power Train Articulating and Oscillating Hitch
Comfort Series Seat For Caterpillar Machines Optimized Seat Air Suspension with Air Compressor
2011/05/09 Additional Front Signal Lamps Are in Production on Certain Off-Highway Trucks {1430, 1432}
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Seat
AP1055E and BG1055E Asphalt Pavers Machine Systems Position Sensor (Paddle)
735B, 740B and 740B EJECTOR Articulated Trucks Engine Supplement Clean Emissions Module - Remove and Install
541 Series 2 and 552 Series 2 Track Feller Bunchers Specifications
AP1000E and BG1000E Asphalt Pavers Machine Systems Screed - Remove and Install
AP1055E and BG1055E Asphalt Pavers Propel System Track Roller Frame (Mobil-Trac)
2011/03/18 Revised Piston Cooling Jets - Remove and Install for C175-16 and C175-20 Machine Engines {1214}
Rework Procedure For Brake Friction Discs, Brake Control Valves, and the Covers on Certain M Series Motor Graders{4251, 4265, 4267, 4269} Rework Procedure For Brake Friction Discs, Brake Control Valves, and the Covers on Certain M Series Motor Graders{4251, 4265, 4267, 4269}
541 Series 2 and 552 Series 2 Track Feller Bunchers Daily Inspection
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Ventilation Blower Wheel - Inspect/Clean
541 Series 2 and 552 Series 2 Track Feller Bunchers Alternate Exit
AP1055E and BG1055E Asphalt Pavers Machine Systems Final Drive Planetary - Remove
AP1055E and BG1055E Asphalt Pavers Machine Systems Final Drive Planetary - Install
541 Series 2 and 552 Series 2 Track Feller Bunchers Operator Controls