The user is responsible for the performance of maintenance. All adjustments, the use of proper lubricants, fluids, filters, and the replacement of components due to normal wear and aging are included. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components.
Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, in order to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Refer to the maintenance procedure for any other exceptions that may change the maintenance intervals.
Note: The aftertreatment system can be expected to function properly for the useful life of the engine (emissions durability period), as defined by regulation. All prescribed maintenance requirements must be followed.
Note: Before each consecutive interval is performed, all maintenance from the previous interval must be performed.
When Required
Film (Product Identification) - CleanScreed - Check/Adjust
Every 10 Service Hours or Daily
Screed - CleanVibratory Shaft Bearing - Lubricate
Every 50 Service Hours or Weekly
Screed - LubricateEvery 250 Service Hours
End Gate Actuator - LubricateToggle Switch - Inspect