770G and 772G Off-Highway Truck Power Train Caterpillar


Torque Converter Lockup Clutch Leakage - Test

Usage:

770G ECM

表 1
所需工具     数量    
6V-3079 压力软管组件     1    
6V-4143 连接器组件     1    

------ WARNING! ------

机器突然移动,会造成人员伤亡。

机器突然移动或释放气压或油压,可能对机器上或机器附近的人员造成伤害。

在测试和调整任何空气系统或液压系统之前,为防止可能的伤害,执行测试和调整, "概述"部分的程序。



注意

在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。

有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。

按照当地法规和要求处置所有液体。


本测试将确定锁定离合器中是否有损坏的密封。




图 1g02425238

770G 上的变速箱顶部视图

(1) 调节阀(变矩器锁定离合器)的测压口

(2) 变矩器闭锁离合器调节阀




图 2g02425239

772G 上的变速箱顶部视图

(1) 调节阀(变矩器锁定离合器)的测压口

(2) 变矩器闭锁离合器调节阀

  1. 将连接器和软管连接到测压口 (1) 。 将软管另一端放入一个容器中。

  1. 起动发动机。 让变速箱处于空档,使发动机在低怠速转速运行。

  1. 测量 1 分钟内从测压口 (1) 流出的油量。 完成此项检查之后,安装接头。

注: 测压孔流出的油量超过 3.8 L/min (1 US gpm) 可能表明锁定离合器内的密封不良。

Caterpillar Information System:

AP1055E and BG1055E Asphalt Pavers Equipped with a Cat C7.1 Engine Cooling System Water Temperature Regulator - Replace
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Cooling System Coolant Extender (ELC) - Add
770G and 772G Off-Highway Truck Systems Windshield Wiper Motor - Test
EMCP 3 to EMCP 4.1/4.2 Cat ® Retrofit Instructions{4490} EMCP 3 to EMCP 4.1/4.2 Cat ® Retrofit Instructions{4490}
AS3301C Asphalt Screed Maintenance Interval Schedule
AS2302C Asphalt Screed Maintenance Interval Schedule
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905} 9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
2011/02/15 Correction to Systems Operation Testing and Adjusting , "Relief Valve (Line) - Test and Adjust" {5117}
Procedure to Update the 225-8210 Accumulator Lines Gp on Certain 773F and 775F Off-Highway Trucks{4257, 4263, 5068} Procedure to Update the 225-8210 Accumulator Lines Gp on Certain 773F and 775F Off-Highway Trucks{4257, 4263, 5068}
Sprockets and Retainers Wear on the Service Brake Groups and the Final Drive Groups and For Certain Motor Graders{4050, 4251, 4267} Sprockets and Retainers Wear on the Service Brake Groups and the Final Drive Groups and For Certain Motor Graders{4050, 4251, 4267}
2011/09/14 Installation of Alternative Seat Height Adjustment Valve {7312, 7324}
Updated Differential Bushing is Available for Certain Motor Graders{3258} Updated Differential Bushing is Available for Certain Motor Graders{3258}
AP1055E and BG1055E Asphalt Pavers Equipped with a Cat C7.1 Engine Engine Mounts - Inspect
2011/03/07 A New Procedure to Update the Accumulator Lines GP on Certain 773F and 775F Off-Highway Trucks is Available {4257, 4263, 5068}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950} Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950} Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
AP1055E and BG1055E Asphalt Pavers Equipped with a Cat C7.1 Engine Fumes Disposal Filter Element - Replace
AP1055E and BG1055E Asphalt Pavers Equipped with a Cat C7.1 Engine Hydraulic System Oil and Filters - Change
AP1055E and BG1055E Asphalt Pavers Equipped with a Cat C7.1 Engine Pump Drive Breather - Clean
AP1055E and BG1055E Asphalt Pavers Equipped with a Cat C7.1 Engine Track Roller Bearings - Inspect
AP1055E and BG1055E Asphalt Pavers Equipped with a Cat C7.1 Engine Track Roller Bearings - Lubricate
Mobil-TracSystems/MTS {4198} Mobil-TracSystems/MTS {4198}
AP1000E and BG1000E Asphalt Pavers Machine Systems Piston Pump (Tamper Bar) - Remove
AP1000E and BG1000E Asphalt Pavers Machine Systems Piston Pump (Tamper Bar) - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.