Engine Mounts - Inspect
Show/hide table
| |
| Illustration 1 | g02425276 |
There are four engine mounts. Be sure to inspect each mount.
Inspect the engine mounts for deterioration.
Inspect the engine mounts for correct bolt torque.
Engine vibration can be caused by improper mounting of the engine. Engine vibration can be caused by loose engine mounts or deteriorated engine mounts.
Replace any engine mount that is deteriorated.
If the mounts are loose, torque the front engine mounts and the rear engine mounts to
Caterpillar Information System:
770G and 772G Off-Highway Truck Power Train Torque Converter Lockup Clutch Leakage - Test
AP1055E and BG1055E Asphalt Pavers Equipped with a Cat C7.1 Engine Cooling System Water Temperature Regulator - Replace
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Cooling System Coolant Extender (ELC) - Add
770G and 772G Off-Highway Truck Systems Windshield Wiper Motor - Test
EMCP 3 to EMCP 4.1/4.2 Cat ® Retrofit Instructions{4490} EMCP 3 to EMCP 4.1/4.2 Cat ® Retrofit Instructions{4490}
AS3301C Asphalt Screed Maintenance Interval Schedule
AS2302C Asphalt Screed Maintenance Interval Schedule
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905} 9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
2011/02/15 Correction to Systems Operation Testing and Adjusting , "Relief Valve (Line) - Test and Adjust" {5117}
Procedure to Update the 225-8210 Accumulator Lines Gp on Certain 773F and 775F Off-Highway Trucks{4257, 4263, 5068} Procedure to Update the 225-8210 Accumulator Lines Gp on Certain 773F and 775F Off-Highway Trucks{4257, 4263, 5068}
Sprockets and Retainers Wear on the Service Brake Groups and the Final Drive Groups and For Certain Motor Graders{4050, 4251, 4267} Sprockets and Retainers Wear on the Service Brake Groups and the Final Drive Groups and For Certain Motor Graders{4050, 4251, 4267}
2011/09/14 Installation of Alternative Seat Height Adjustment Valve {7312, 7324}
2011/03/07 A New Procedure to Update the Accumulator Lines GP on Certain 773F and 775F Off-Highway Trucks is Available {4257, 4263, 5068}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950} Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950} Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
AP1055E and BG1055E Asphalt Pavers Equipped with a Cat C7.1 Engine Fumes Disposal Filter Element - Replace
AP1055E and BG1055E Asphalt Pavers Equipped with a Cat C7.1 Engine Hydraulic System Oil and Filters - Change
AP1055E and BG1055E Asphalt Pavers Equipped with a Cat C7.1 Engine Pump Drive Breather - Clean
AP1055E and BG1055E Asphalt Pavers Equipped with a Cat C7.1 Engine Track Roller Bearings - Inspect
AP1055E and BG1055E Asphalt Pavers Equipped with a Cat C7.1 Engine Track Roller Bearings - Lubricate
Mobil-TracSystems/MTS {4198} Mobil-TracSystems/MTS {4198}
AP1000E and BG1000E Asphalt Pavers Machine Systems Piston Pump (Tamper Bar) - Remove
AP1000E and BG1000E Asphalt Pavers Machine Systems Piston Pump (Tamper Bar) - Install
AP1000E and BG1000E Asphalt Pavers Machine Systems Piston Pump (Right Drag Conveyor and Right Auger Conveyor) - Remove