Oil Cooler (Hydraulic Fan, Steering) - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | FT-1114     | 真空舱     | 1     |
开始:
- 卸下制冷剂冷凝器。
- 释放系统压力。 请参阅拆解和组装, "系统压力 - 释放"。
- 将工具 (A) 安装到转向和液压风扇油箱上。 将一条供气软管连接到工具 (A) 上。 施加 276 至 414 kPa (40 至 60 psi) 的气压。 此步骤将使液压系统抽吸出真空。
Show/hide table
图 1 | g02320836 |
- 拆下螺栓 (1) 。 在对面重新执行此步骤。
Show/hide table
图 2 | g02320880 |
- 向外倾斜油冷却器 (2) 。
Show/hide table
图 3 | g02320879 |
- 断开软管组件 (3) 。 在对面重新执行此步骤。
- 卸下螺栓 (4) 。 在对面重新执行此步骤。
Show/hide table
图 4 | g02320895 |
- 拆下油冷却器 (5) 。
Show/hide table
图 5 | g02320897 |
安装步骤
- 按相反顺序安装油冷却器 (5) 。
Caterpillar Information System:
770G and 772G Off-Highway Truck Engine Lockout Control
C15 and C18 Tier 4 Final Engines Electronic Unit Injector - Adjust
2010/12/14 The Hydraulic Oil Lines Group has Been Improved on the 777F Off-Highway Truck {5057}
Bench Test Procedure for a D6T and D6R Track-Type Tractor and PL72 Pipelayer Transmission{3030, 3073} Bench Test Procedure for a D6T and D6R Track-Type Tractor and PL72 Pipelayer Transmission{3030, 3073}
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System MID 145 - CID 1473 - FMI 12
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System MID 145 - CID 1472 - FMI 12
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Engine Supplement Engine - Remove and Install
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System MID 027 - CID 0297 - FMI 14
C4.4 Industrial Engine Clean Emissions Module
320E and 323E Excavators Machine System Specifications Control Valve (Auxiliary)
320E and 323E Excavators Machine System Specifications Relief Valve (Line)
2011/01/13 Procedure to Rework the Parking Brake Oil Pressure Switch on Certain R1300 and R1300G Load Haul Dump Machines {1408, 1435}
C13 Engine for Caterpillar Built Machines Exhaust Elbow - Remove and Install
2010/12/09 A New Swing Cylinder Provides Improved Durability and Reliability on Certain Backhoe Loader Machines {7562}
770G and 772G Off-Highway Truck Machine Lockout Control
773G and 775G Off-Highway Truck Hydraulic and Braking System Operational Checks
777G Off-Highway Truck Hydraulic and Braking System Hoist System Troubleshooting
Overflow Guard Installation Procedure for Certain Buckets on R1600G and R1600H Load Haul Dump Machines{7186, 7186} Overflow Guard Installation Procedure for Certain Buckets on R1600G and R1600H Load Haul Dump Machines{7186, 7186}
C13 Engines for Caterpillar Built Machines Pressure Sensor (DPF) - Remove and Install
777G Off-Highway Truck Hydraulic and Braking System Brake System Troubleshooting
C13 Engines for Caterpillar Built Machines Pressure Sensor (ARD Combustion Air) - Remove and Install
770G and 772G Off-Highway Truck Electric Drive Pump (Prelubrication) - Remove and Install
777G Off-Highway Truck Hydraulic and Braking System Brake Oil Overheating Troubleshooting
Installation Procedure for Coolant Level Sensor Retrofit for Non-VIMS 777F Machines{7422} Installation Procedure for Coolant Level Sensor Retrofit for Non-VIMS 777F Machines{7422}