Pressure Sensor (DPF) - Remove and Install
Removal Procedure
- Disconnect harness assembly (1) . Remove pressure sensor (2) and O-ring seal (3) .
Show/hide table
 | |
| Illustration 1 | g02321394 |
View of the CEM and sensor location. | |
Show/hide table
 | |
| Illustration 2 | g02321395 |
Installation Procedure
- Install pressure sensor (2) in reverse order.
- Tighten pressure sensor (2) to a torque of 10 ± 2 N·m (89 ± 18 lb in).
Note: Do not pre-tighten the sensor using the plastic portion of the sensor. Pre-tighten the sensor using the metal hex portion of the sensor. Damage can occur to the sensor if pre-tightened using the plastic portion of the sensor.
Caterpillar Information System:
Overflow Guard Installation Procedure for Certain Buckets on R1600G and R1600H Load Haul Dump Machines{7186, 7186} Overflow Guard Installation Procedure for Certain Buckets on R1600G and R1600H Load Haul Dump Machines{7186, 7186}
777G Off-Highway Truck Hydraulic and Braking System Hoist System Troubleshooting
773G and 775G Off-Highway Truck Hydraulic and Braking System Operational Checks
770G and 772G Off-Highway Truck Machine Lockout Control
2010/12/09 A New Swing Cylinder Provides Improved Durability and Reliability on Certain Backhoe Loader Machines {7562}
C13 Engine for Caterpillar Built Machines Exhaust Elbow - Remove and Install
770G and 772G Off-Highway Truck Oil Cooler (Hydraulic Fan, Steering) - Remove and Install
770G and 772G Off-Highway Truck Engine Lockout Control
C15 and C18 Tier 4 Final Engines Electronic Unit Injector - Adjust
2010/12/14 The Hydraulic Oil Lines Group has Been Improved on the 777F Off-Highway Truck {5057}
Bench Test Procedure for a D6T and D6R Track-Type Tractor and PL72 Pipelayer Transmission{3030, 3073} Bench Test Procedure for a D6T and D6R Track-Type Tractor and PL72 Pipelayer Transmission{3030, 3073}
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System MID 145 - CID 1473 - FMI 12
777G Off-Highway Truck Hydraulic and Braking System Brake System Troubleshooting
C13 Engines for Caterpillar Built Machines Pressure Sensor (ARD Combustion Air) - Remove and Install
770G and 772G Off-Highway Truck Electric Drive Pump (Prelubrication) - Remove and Install
777G Off-Highway Truck Hydraulic and Braking System Brake Oil Overheating Troubleshooting
Installation Procedure for Coolant Level Sensor Retrofit for Non-VIMS 777F Machines{7422} Installation Procedure for Coolant Level Sensor Retrofit for Non-VIMS 777F Machines{7422}
2011/01/10 New Liquid Level Sensor Group Is Now Available on 777F Non-VIMS Off-Highway Trucks {7422}
C13 Tier 4 Final Engines Idler Pulley
770G and 772G Off-Highway Truck Machine Systems Gear Pump (Hoist) - Disassemble
770G and 772G Off-Highway Truck Machine Systems Gear Pump (Hoist) - Assemble
2014/05/15 An Improved Hand Throttle Is Now Used on Certain Compact Track Loader, Multi Terrain Loader, and Skid Steer Loader Machines {1265}
777G Off-Highway Truck Hydraulic and Braking System Service Brakes and Retarder System Pressure - Test
770G and 772G Off-Highway Truck Lifting and Tying Down the Machine