Exhaust Gas Valve (NRS) - Remove and Install
拆卸步骤
- 断开卡箍组件 (1) 。 断开线束组件 (2) ,然后断开软管组件 (4) 。 断开卡箍组件 (3) 。
Show/hide table
图 1 | g02150623 |
- 拆下四颗螺栓 (5) ,然后拆下排气阀 (6) 。
Show/hide table
图 2 | g02150662 |
安装步骤
- 按照相反顺序安装排气阀 (6) 。
- 将卡箍组件 (3) 拧紧至扭矩为 8.5 ± 2 N·m (75 ± 18 lb in)。
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines Pressure Sensor - Calibrate
773G and 775G Off-Highway Truck Lifting and Tying Down the Machine
C27 and C32 Engines for Caterpillar Built Machines Sensor Signal (Analog, Active) - Test
773G and 775G Off-Highway Truck Stopping the Engine if an Electrical Malfunction Occurs
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Differential Pinion - Assemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Differential Pinion - Disassemble
773G and 775G Off-Highway Truck Machine Lockout Control
C4.4 Industrial Engine Fuel Injection Lines
777G Off-Highway Truck Power Train Window Wiper and Wiper Motor
C6.6 Industrial Engine Rocker Shaft - Disassemble
C6.6 Industrial Engine Rocker Shaft and Pushrod - Remove
C4.4 Industrial Engine Fuel Injection Pump
C13, C15, and C18 Tier 4 Final Engines Pressure Sensor (NRS Absolute)
773G and 775G Off-Highway Truck Towing the Machine
3524B and C175 Engines for Off-Highway Truck/Tractors Pressure Sensor - Coolant
773G and 775G Off-Highway Truck Lowering the Body with Engine Stopped
Removing the 2W-1055 Elbow {1307} Removing the 2W-1055 Elbow {1307}
AP555E and BG555E Asphalt Pavers Machine Systems Hydraulic Filter (Suction Return) - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Differential - Disassemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Differential - Assemble
C15 and C18 Engines for Caterpillar Built Machines Exhaust Elbow - Remove and Install
2010/04/29 The Hydraulic Tank Group on Certain Motor Graders now Contains a Strainer {4332, 5056}
AP555E and BG555E Asphalt Pavers Machine Systems Piston Motor (Auger Conveyor) - Remove
AP555E and BG555E Asphalt Pavers Machine Systems Piston Motor (Auger Conveyor) - Install