C4.4 Industrial Engine Caterpillar


Fuel Injection Lines

Usage:

C4.4 448

------ WARNING! ------

Contact with high pressure fuel may cause fluid penetration and burn hazards. High pressure fuel spray may cause a fire hazard. Failure to follow these inspection, maintenance and service instructions may cause personal injury or death.


Refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" before adjustments and repairs are performed.


NOTICE

Refer to Systems Operation, Testing, and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.


Ensure that all adjustments and repairs are performed by authorized personnel that have had the correct training.



Illustration 1g02334261
Typical example

(1) ( 2) Torque for the nuts on the high-pressure fuel lines ... 55 N·m (41 lb ft)

Caterpillar Information System:

777G Off-Highway Truck Power Train Window Wiper and Wiper Motor
C6.6 Industrial Engine Rocker Shaft - Disassemble
C6.6 Industrial Engine Rocker Shaft and Pushrod - Remove
C4.4 Industrial Engine Fuel Injection Pump
C6.6 Industrial Engine Valve Mechanism Cover - Remove and Install
773G and 775G Off-Highway Truck Engine Lockout Control
C6.6 Industrial Engine Crankcase Breather - Install
C6.6 Industrial Engine Crankcase Breather - Remove
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Ventilation Inlet Ducts - Inspect/Clean
C6.6 Industrial Engine Accessory Drive - Remove and Install - Accessory Drive SAE "B"
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems Tilt Cylinder - Remove and Install
C6.6 Industrial Engine Accessory Drive - Remove and Install - Accessory Drive SAE "A"
773G and 775G Off-Highway Truck Machine Lockout Control
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Differential Pinion - Disassemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Differential Pinion - Assemble
773G and 775G Off-Highway Truck Stopping the Engine if an Electrical Malfunction Occurs
C27 and C32 Engines for Caterpillar Built Machines Sensor Signal (Analog, Active) - Test
773G and 775G Off-Highway Truck Lifting and Tying Down the Machine
C27 and C32 Engines for Caterpillar Built Machines Pressure Sensor - Calibrate
C9.3 Engines for Caterpillar Built Machines Exhaust Gas Valve (NRS) - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Pressure Sensor (NRS Absolute)
773G and 775G Off-Highway Truck Towing the Machine
3524B and C175 Engines for Off-Highway Truck/Tractors Pressure Sensor - Coolant
773G and 775G Off-Highway Truck Lowering the Body with Engine Stopped
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.