Fuel Injection Pump
Note: The timing of the fuel injection pump will need to be checked by trained personnel. In order to check the timing of the fuel injection pump, refer to Systems Operation, Testing, and Adjusting, "Fuel Injection Pump Timing - Check".
Show/hide table
NOTICE |
---|
Refer to Systems Operation, Testing, and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system. |
Show/hide table
Illustration 1 | g02335956 |
Typical example |
(1) Tighten the studs to the following torque. ...
(2) Tighten the mounting nut to the following torque. ...
(3) Tighten the setscrews to the following torque. ...
(4) Tighten the screws for the suction control valve to the following torque. ...
(5) Tighten the fuel temperature sensor to the following torque. ...
(6) Tighten the screw to the following torque. ...
Caterpillar Information System:
C6.6 Industrial Engine Valve Mechanism Cover - Remove and Install
773G and 775G Off-Highway Truck Engine Lockout Control
C6.6 Industrial Engine Crankcase Breather - Install
C6.6 Industrial Engine Crankcase Breather - Remove
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Ventilation Inlet Ducts - Inspect/Clean
C6.6 Industrial Engine Accessory Drive - Remove and Install - Accessory Drive SAE "B"
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems Tilt Cylinder - Remove and Install
C6.6 Industrial Engine Accessory Drive - Remove and Install - Accessory Drive SAE "A"
AP1055E and BG1055E Asphalt Pavers Equipped with a Cat C7.1 Engine Track Tension - Check
AP1055E and BG1055E Asphalt Pavers Equipped with a Cat C7.1 Engine Track Roller Frame - Lubricate
C6.6 Industrial Engine Housing (Front) - Install - Heavy Duty Housing (Front)
773G and 775G Off-Highway Truck Power Train Final Drive
C6.6 Industrial Engine Rocker Shaft and Pushrod - Remove
C6.6 Industrial Engine Rocker Shaft - Disassemble
777G Off-Highway Truck Power Train Window Wiper and Wiper Motor
C4.4 Industrial Engine Fuel Injection Lines
773G and 775G Off-Highway Truck Machine Lockout Control
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Differential Pinion - Disassemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Differential Pinion - Assemble
773G and 775G Off-Highway Truck Stopping the Engine if an Electrical Malfunction Occurs
C27 and C32 Engines for Caterpillar Built Machines Sensor Signal (Analog, Active) - Test
773G and 775G Off-Highway Truck Lifting and Tying Down the Machine
C27 and C32 Engines for Caterpillar Built Machines Pressure Sensor - Calibrate
C9.3 Engines for Caterpillar Built Machines Exhaust Gas Valve (NRS) - Remove and Install