Gear Pump (Brake Cooling, Brake Actuation and Rear Axle Motor Drive)
Show/hide table
Illustration 1 | g01954254 |
(1) Torque for eight nuts ...
(2) Section for brake cooling
- Rotation ... Clockwise
- Displacement per revolution ...
254.0 cc (15.5 cubic inch) - Maximum pressure ...
3450 kPa (500 psi) - Maximum speed ... 2500 rpm
- Displacement per revolution ...
(3) Section for brake actuation
- Rotation ... Clockwise
- Displacement per revolution ...
49.6 cc (3.0 cubic inch) - Maximum continuous pressure ...
20700 kPa (3002 psi) - Maximum speed ... 2500 rpm
- Displacement per revolution ...
(4) Section for rear axle motor drive
- Rotation ... Clockwise
- Displacement per revolution ...
19.7 cc (1.2 cubic inch) - Maximum continuous pressure ...
20700 kPa (3002 psi) - Maximum speed ... 2500 rpm
- Displacement per revolution ...
(5) Torque for four bolts ...
Caterpillar Information System:
797F and 797F XQ Off-Highway Truck Braking System Motor Rotating (Brake Cooling) - Extra Retarding
797F and 797F XQ Off-Highway Truck Braking System Piston Motor (Brake Cooling) - Extra Retarding
797F and 797F XQ Off-Highway Truck Power Train Gear Pump (Brake, Rear Axle Lubrication) - Extra Retarding
2009/08/03 Special Instruction for the Heated Body Kit is Available for Articulated Trucks {1061}
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System Fill Time for the Transmission Clutch - Calibrate
584 and 584HD Forwarders Camera - Clean/Adjust - If Equipped
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System Engagement Pressure for the Transmission Clutch - Calibrate
793F Off-Highway Truck Power Train Axle Shaft - Remove
793F and 797F Off-Highway Trucks Power Train Electronic Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
2009/09/28 New Software Released For AccuGrade Office {5267, 7220}
2009/12/23 Improved Seals for the Service Brake are Available for the 797, for the 797B, and for Certain 797F Off Highway Trucks {4251, 4267}
2009/07/27 Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557}
797F and 797F XQ Off-Highway Truck Braking System Piston Pump (Brake Cooling) - Extra Retarding
793F Off-Highway Truck Power Train Transmission and Transfer Gears - Remove and Install
CD44B and CD54B Vibratory Asphalt Compactors Alternator - Inspect
2009/08/03 Pistons and Piston Rings {1225, 1225}
M325D L MH and M325D MH Material Handlers Hydraulic System Swing Bearing Movement - Measure
2009/07/20 Method for Monitoring The Landfill Compactor Tip Assembly ( 7 inch step ) {4206, 6806}
2011/01/06 Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2009/07/27 New Bumpers Are Now Used on Cab Doors {7308}
770 and 772 Off-Highway Truck Camera - If Equipped
2009/09/07 Rework Procedure to Reinforce the Mounting of the Cowl {7051, 7155, 7251, 7254, 7267}
Rework Procedure to Reinforce the Cowl Assembly{0679, 7051, 7155, 7251, 7254, 7267} Rework Procedure to Reinforce the Cowl Assembly{0679, 7051, 7155, 7251, 7254, 7267}
797F and 797F XQ Off-Highway Truck Hydraulic System Control Valve (Brake Cooling, Hoist)