Control Valve (Brake Cooling, Hoist)
Show/hide table
Illustration 1 | g03745534 |
Show/hide table
Specification for 250-7621 Control Valve Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 4     | 134-5004 Plug     | Torque to 325 ± 33 N·m (240 ± 24 lb ft).     |
2     | 2     | 4T-0935 Spring     | Length under test force is 21.0 mm (0.83 inch). Test force is 14.0 ± 1.1 N (3.1 ± 0.2 lb). Free length after test is 33.0 mm (1.30 inch).     |
Show/hide table
Illustration 2 | g03745536 |
Section A-A |
Show/hide table
Item     | Qty     | Part     | Specification Description     |
3     | 2     | 326-5212 Coil     | Operating voltage is 24 VDC. Resistance at 25 °C (77 °F) is 5.0 ± 0.3 Ohms.     |
4     | 2     | 316-1438 Cartridge As     | Torque to 35 ± 3 N·m (26 ± 2 lb ft).     |
5     | 2     | 121-2051 Spring     | Length under test force is 46.0 mm (1.81 inch). Test force is 21.00 ± 0.63 N (4.72 ± 0.14 lb). Free length after test is 53.53 mm (2.107 inch).     |
6     | 2     | 198-2914 Nut     | Torque to 20 ± 3 N·m (177 ± 27 lb in).     |
7     | 2     | 177-1405 Spring     | Length under test force is 8.20 mm (0.323 inch). Test force is 18.41 ± 0.55 N (4.14 ± 0.12 lb). Free length after test is 12.29 mm (0.484 inch).     |
8     | 2     | 118-5087 Spring     | Length under test force is 50.0 mm (1.97 inch). Test force is 243 ± 19 N (55 ± 4 lb). Free length after test is 63.5 mm (2.50 inch).     |
9     | 2     | 118-5086 Spring     | Length under test force is 55.0 mm (2.17 inch). Test force is 438 ± 35 N (98 ± 8 lb). Free length after test is 76.2 mm (3.00 inch).     |
Caterpillar Information System:
Rework Procedure to Reinforce the Cowl Assembly{0679, 7051, 7155, 7251, 7254, 7267} Rework Procedure to Reinforce the Cowl Assembly{0679, 7051, 7155, 7251, 7254, 7267}
2009/09/07 Rework Procedure to Reinforce the Mounting of the Cowl {7051, 7155, 7251, 7254, 7267}
770 and 772 Off-Highway Truck Camera - If Equipped
2009/07/27 New Bumpers Are Now Used on Cab Doors {7308}
2011/01/06 Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2009/07/20 Method for Monitoring The Landfill Compactor Tip Assembly ( 7 inch step ) {4206, 6806}
M325D L MH and M325D MH Material Handlers Hydraulic System Swing Bearing Movement - Measure
2009/08/03 Pistons and Piston Rings {1225, 1225}
CD44B and CD54B Vibratory Asphalt Compactors Alternator - Inspect
793F Off-Highway Truck Power Train Transmission and Transfer Gears - Remove and Install
797F and 797F XQ Off-Highway Truck Braking System Piston Pump (Brake Cooling) - Extra Retarding
797F and 797F XQ Off-Highway Truck Power Train Gear Pump (Brake Cooling, Brake Actuation and Rear Axle Motor Drive)
M325D L MH and M325D MH Material Handlers Hydraulic System Travel Motor (Destroke Point) - Test and Adjust
854G Wheel Dozer Secondary Steering - Test
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Electrohydraulic System Piston Pump (Implement) (Pilot)
C13, C15, and C18 Tier 4 Final Engines Cylinder Head Valves
793F Off-Highway Truck Power Train Differential and Bevel Gear - Remove
584 and 584HD Forwarders Window - Check
584 and 584HD Forwarders Windows - Clean
584 and 584HD Forwarders Mounting and Dismounting
795F AC and 795F AC XQ Off-Highway Truck Power Train Electronic Control System MID 081 - CID 3271 - FMI 08
795F AC and 795F AC XQ Off-Highway Truck Power Train Electronic Control System MID 081 - CID 3272 - FMI 08
795F AC and 795F AC XQ Off-Highway Truck Power Train Electronic Control System MID 081 - CID 3273 - FMI 08
795F AC and 795F AC XQ Off-Highway Truck Power Train Electronic Control System MID 081 - CID 3274 - FMI 08