Calibration Fluid for Fuel Nozzle Test Equipment Is Available {0782, 1251, 1254, 1290, 1713}
- Engine:
- 1140 (S/N: 36B1-UP)
- Generator Set:
- 3406 (S/N: 4ZR1-UP)
- Industrial Engine:
- 3412D (S/N: REA1-UP)
- Marine Engine:
- 3406C (S/N: 1SS1-UP)
- Truck Engines:
- 3406C (S/N: 8PN1-UP)
- 1145 (S/N: 97B1-UP)
- 1150 (S/N: 96B1-UP)
- 1160 (S/N: 95B1-UP)
- 3145 (S/N: 65P1-UP)
- 3150 (S/N: 66P1-UP)
- 3160 (S/N: 98M1-UP)
- 3204 (S/N: 3PC1-UP)
- 3208 (S/N: 29A1-UP; 30A1-UP; 5YF1-UP; 40S1-UP; 32Y1-UP; 01Z1-UP; 02Z1-UP)
- 3304 (S/N: 13E1-UP)
- 3304B (S/N: 9HK1-UP; 1NS1-UP; 1PS1-UP)
- 3306 (S/N: 64Z1-UP; 85Z1-UP)
- 3306B (S/N: 1RS1-UP; 9DS1-UP; 5GZ1-UP; 63Z1-UP; 7JB1-UP; 9NR1-UP; 5KD1-UP; 2AJ1-UP; 8JJ1-UP)
- 3306C (S/N: 7RJ1-UP; 9TL1-UP; 3KS1-UP)
- 3406B (S/N: 7FB1-UP; 5YG1-UP)
- 3412 (S/N: 9XF1-UP; 2WJ1-UP)
- 3412C (S/N: BAK1-UP; 9BR1-UP)
- 1673 (S/N: 70B1-UP)
- 3160 (S/N: 67P1-UP)
- 3208 (S/N: 75V1-UP; 51Z1-UP)
- 3304 (S/N: 83Z1-UP)
- 3306 (S/N: 84Z1-UP)
- 3406 (S/N: 92U1-UP)
- 3406B (S/N: 8TC1-UP)
- D320 (S/N: 63B1-UP)
- D330 (S/N: 82B1-UP)
- D330A (S/N: 57B1-UP; 86B1-UP)
- D333 (S/N: 59B1-UP; 80B1-UP)
- D342C (S/N: 50B1-UP)
- D379B (S/N: 34Z1-UP)
- D398B (S/N: 35Z1-UP)
- D399 (S/N: 35B1-UP; 91B1-UP; 36Z1-UP)
- 3406C (S/N: 8FS1-UP)
- 3412C (S/N: BAX1-UP)
- 3406 DI (S/N: 90U1-UP)
- D342C (S/N: 49B1-UP)
- 3408C (S/N: 1TS1-UP)
- 3406 (S/N: 91U1-UP)
This calibration fluid is available in two different containers. The fluids are recommended for use with the 5P-4150 Nozzle Testing Group .
The 5P-4150 Nozzle Testing Group is used for the bench testing of a fuel nozzle only after the nozzle has been tested in the engine and the performance of the nozzle is questionable.
Caterpillar Information System:
793F and 793F CMD Off-Highway Truck Power Train Temperature Sensor (Engine Coolant)
CB54, CB54 XW and CB64 Vibratory Compactor Propel System Direction and Speed Control
C9.3 Engines for Caterpillar Built Machines Fuel System Pressure - Test
3306C Engines for Caterpillar Built Machines Turbocharger
120K and 120K Series 2 Motor Graders Power Train Clutch Control (Modulation)
2008/11/17 Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
C7 Engines for Caterpillar Built Machines Event Codes
12K, 140K, 140K Series 2 and 160K Motor Graders Power Train Case and Frame
12K, 140K, 140K Series 2 and 160K Motor Graders Power Train Final Drive
2008/11/17 The 6V-4022 Fuel Injector Tester Is not Available {1251, 1254, 1290, 1713}
120K and 120K Series 2 Motor Graders Hydraulic and Steering System Metering Pump (Steering)
2008/12/29 The Plug in the Control Valve Groups is Updated {5051}
120K and 120K Series 2 Motor Graders Hydraulic and Steering System Hydraulic and Steering System
120K and 120K Series 2 Motor Graders Hydraulic and Steering System Pump Control Valve (Implement, Steering) - Test and Adjust
2009/01/26 The List of Approved Telehandler Work Tools Has Been Updated {6459, 6501, 6542, 6700, 7405}
2008/11/17 Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
12K, 140K and 160K Motor Graders Engine Air Filter Service Indicator - Inspect/Replace
2008/11/01 Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
C15 and C18 Generator Set Engines Flywheel - Install
C7 Engines for Caterpillar Built Machines Diagnostic Trouble Codes
C7 Engines for Caterpillar Built Machines Component Location
C9 Engine and D7E Track-Type Tractors Fuel Rail Pressure Is Low
Roll Over Protective Structure and Falling Object Protective Structure Identification Film Retention{7000, 7405, 7557} Roll Over Protective Structure and Falling Object Protective Structure Identification Film Retention{7000, 7405, 7557}
2008/11/17 The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}