Aftercooler Core - Install - ATAAC Aftercooler
安装步骤
- 将适当的起吊设备连接到后冷器 (17) 上。 后冷器 (17) 的重量约为 136 kg (300 lb)。
Show/hide table
 | |
| 图 1 | g01592340 |
- 定位后冷器 (17) 并安装螺栓 (18) 。
- 对另一个后冷器重复步骤 1 和 2。
- 将适当的起吊设备连接到后冷器组件 (15) 上。 后冷器组件 (15) 的重量约为 476 kg (1050 lb)。
Show/hide table
 | |
| 图 2 | g01592317 |
Show/hide table
 | |
| 图 3 | g01592332 |
- 定位后冷器组件 (15) 。
- 安装螺栓 (16) ，并在另一侧重复该步骤。
- 将适当的起吊设备连接到踏梯组件 (13) 上。 踏梯组件 (13) 的重量约为 200 kg (440 lb)。
Show/hide table
 | |
| 图 4 | g01592315 |
- 定位踏梯组件 (13) 。 安装螺栓 (14) 。
- 定位管组件 (12) ，然后拧紧卡箍 (11) 。 安装螺栓 (10) ，然后对另一侧重复此步骤。
Show/hide table
 | |
| 图 5 | g01591875 |
Show/hide table
 | |
| 图 6 | g01591874 |
- 定位管组件 (9) ，然后拧紧卡箍 (8) 。 对另一侧重复上述步骤。
Show/hide table
 | |
| 图 7 | g01591833 |
- 定位支撑 (6) 和 (7) ，然后安装螺栓 (5) 。
Show/hide table
 | |
| 图 8 | g01591798 |
- 定位传感器 (4) ，然后连接线束组件 (3) 。
Show/hide table
 | |
| 图 9 | g01591794 |
- 需要两个人来安装格栅 (2) 。 每个格栅 (2) 的重量约为 23 kg (50 lb)。
Show/hide table
 | |
| 图 10 | g01591777 |
Show/hide table
 | |
| 图 11 | g01591775 |
- 连接线束组件 (1) 。
Caterpillar Information System:
795F AC and 795F AC XQ Off-Highway Truck Engine Supplement Aftercooler Core - Remove - ATAAC Aftercooler
785D OEM Off-Highway Truck Machine Systems Center Arm (Steering) - Remove and Install
Installation of the 323-4207 Valve and Lines for 725,730 and 730 Ejector Articulated Trucks{5057, 5067} Installation of the 323-4207 Valve and Lines for 725,730 and 730 Ejector Articulated Trucks{5057, 5067}
1390 Track Feller Buncher Control Valve (Main)
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems Control Valve (Main)
CD54 Vibratory Compactor C4.4 Engine Supplement Refrigerant Receiver-Dryer - Remove and Install
CD54 Vibratory Compactor C4.4 Engine Supplement Refrigerant Condenser - Remove and Install
CD54 Vibratory Compactor C4.4 Engine Supplement Refrigerant Compressor - Remove and Install
CD54 Vibratory Compactor C4.4 Engine Supplement Electric Starting Motor - Remove and Install
2008/09/01 Understanding the Pallet Fork to Carriage Interface on Integrated Toolcarrier Carrier Systems {6136, 6402}
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems Piston Pump (Main Hydraulic)
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Parking
2008/10/20 A New Modular Handle Gp Is Available for the Joystick Control Gp {5705}
AP600D and BG600D Asphalt Pavers Machine Systems Piston Motor (Auger and Conveyor)
2008/08/11 The Torque for the Bolts and the Plugs on the Steering Pumps has Increased {5070}
Steering Clutch and Brake Discs and Plates for Scrapers, Pipelayers, Track-Type Tractors, and Loaders {4100, 4255} Steering Clutch and Brake Discs and Plates for Scrapers, Pipelayers, Track-Type Tractors, and Loaders {4100, 4255}
PL61 Pipelayer Front Idler Position - Check/Adjust
1390 Track Feller Buncher Control Valve (Intermittent Saw) - If Equipped
1390 Track Feller Buncher Swing System
Filtration Procedure for Wheel Loader, Wheel Dozer, Soil Compactor, Landfill Compactor Hydraulic Oil {0680, 0768, 5056, 5068} Filtration Procedure for Wheel Loader, Wheel Dozer, Soil Compactor, Landfill Compactor Hydraulic Oil {0680, 0768, 5056, 5068}
785D OEM Off-Highway Truck Machine Systems Steering Link - Remove and Install
120K, 120K Series 2, 12K, 140K, 140K Series 2 and 160K Motor Graders Power Train Electronic Control System Features
120K, 120K Series 2, 12K, 140K, 140K Series 2 and 160K Motor Graders Power Train Electronic Control System Location of Electrical Components
120K, 120K Series 2, 12K, 140K, 140K Series 2 and 160K Motor Graders Power Train Electronic Control System Electrical Input Components