A Improvement to Circuit for the Brake Lamp Has Been Made {1432, 4493}
- Motor Grader:
- 120H (S/N: CAF1-UP; ALZ1-UP; 1241-UP)
- 12H (S/N: CBK1-UP; AMZ1-UP; 1251-UP)
- 135H (S/N: CBC1-UP; AMX1-UP)
- 140H (S/N: CCA1-UP; APM1-UP; 1261-UP)
- 143H (S/N: APN1-UP)
- 160H (S/N: ASD1-UP; CCP1-UP)
- 163H (S/N: ARL1-UP)
ReferenceRefer to Special Instruction, REHS4473 for the procedure to add the harness and relay assembly.
A new wiring harness and relay assembly is available. The wiring harness and relay assembly must be used when incandescent bulbs are used in the stop lamps for the brakes. The new harness and the relay offer improved reliability for the 3E-2026 Pressure Switch.
Caterpillar Information System:
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 07
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 06
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 05
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 02
Procedure to Install the New Heater Elements on Asphalt Screeds{6643, 664E} Procedure to Install the New Heater Elements on Asphalt Screeds{6643, 664E}
2007/12/31 Stronger Bolts and Studs Available for Brake Packs {4251}
3500 Spark Ignited Engines Water Pump
Blistering Monarch Hoses{4304, 5057} Blistering Monarch Hoses{4304, 5057}
24M Motor Grader Machine Systems Hydraulic Tank and Filter - Install
24M Motor Grader Machine Systems Hydraulic Tank and Filter - Remove
450E Backhoe Loader Backup Alarm Always Off
Problems Reported with Wheel Lean Bar{4305, 4313, 5225} Problems Reported with Wheel Lean Bar{4305, 4313, 5225}
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Display and Camera - Clean - If Equipped
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0041 - FMI 03
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0041 - FMI 04
PM-201 Cold Planer Machine Systems Hydraulic Cylinder (Elevation) - Remove and Install
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0070 - FMI 03
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Control Manifold (High Flow)
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0070 - FMI 04
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0177 - FMI 03
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0177 - FMI 04
2008/02/04 An Improved Assembly Process for Load Check Valves is Available {5051}
C7 Petroleum Engines Air Inlet Elbow
C7 Petroleum Engines Air Inlet Elbow