Control Manifold (High Flow)
Show/hide table
Illustration 1 | g03736265 |
Show/hide table
Specification for 248-7696 Control Manifold Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 1     | 238-4625 Solenoid Valve Gp     | Final installation torque is 27.2 ± 1.4 N·m (240.7 ± 12.4 lb in).     |
Tighten the coil nut to 6.1 ± 0.7 N·m (54.0 ± 6.2 lb in). |
|||
Nominal voltage is 12 VDC. | |||
Resistance at 25 ± 5°C (77 ± 41°F) is 8.8 ± 0.5 ohms. |
|||
2     | 1     | 250-7662 Check Valve Gp     | Final installation torque is 24 ± 3 N·m (212 ± 27 lb in).     |
3     | 1     | 240-6866 Solenoid Valve Gp     | Final installation torque is 27.2 ± 1.4 N·m (240.7 ± 12.4 lb in).     |
Tighten the coil nut to 6.1 ± 0.7 N·m (54.0 ± 6.2 lb in). |
|||
Nominal voltage is 12 VDC. | |||
Resistance at 25 ± 5°C (77 ± 41°F) is 8.8 ± 0.5 ohms. |
|||
4     | 1     | 249-7707 Solenoid Valve Gp     | Final installation torque is 31 ± 3 N·m (274 ± 27 lb in).     |
Tighten the nut to 5.3 ± 1.5 N·m (46.9 ± 13.3 lb in). |
|||
Nominal voltage is 12 VDC. | |||
Maximum voltage is 14.5 VDC. | |||
Resistance at 25 ± 5°C (77 ± 41°F) is 5.9 ± 0.5 ohms. |
Caterpillar Information System:
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0070 - FMI 03
PM-201 Cold Planer Machine Systems Hydraulic Cylinder (Elevation) - Remove and Install
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0041 - FMI 04
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0041 - FMI 03
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Display and Camera - Clean - If Equipped
2007/12/31 A Improvement to Circuit for the Brake Lamp Has Been Made {1432, 4493}
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 07
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 06
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 05
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 02
Procedure to Install the New Heater Elements on Asphalt Screeds{6643, 664E} Procedure to Install the New Heater Elements on Asphalt Screeds{6643, 664E}
2007/12/31 Stronger Bolts and Studs Available for Brake Packs {4251}
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0070 - FMI 04
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0177 - FMI 03
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0177 - FMI 04
2008/02/04 An Improved Assembly Process for Load Check Valves is Available {5051}
C7 Petroleum Engines Air Inlet Elbow
C7 Petroleum Engines Air Inlet Elbow
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0006 FMI 02
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0006 FMI 05
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0006 FMI 06
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0006 FMI 07
C7 Petroleum Engines Air Inlet Elbow
C7 Petroleum Engines Air Inlet Elbow