Display and Camera - Clean - If Equipped
工作区域视像系统
为了保持足够的视线，应保持工作区域视像系统 (WAVS) 的照相机镜头和显示器清洁。
显示器
Show/hide table
 | |
| 图 1 | g01223034 |
WAVS 显示器 | |
用一块软的潮湿的布清洁显示器。 显示器的表面是软的塑料，很容易被摩擦性物料损坏。 该显示器不是密封的。 不可将显示器浸入液体中。
照相机
Show/hide table
 | |
| 图 2 | g01223051 |
WAVS 照相机位于机器后部，在散热器护罩顶部上。 | |
用湿布或用水喷来清洁照相机镜头。照相机是一个密封件。 高压喷水不会影响照相机
照相机配备有内部加热器以协助抵消湿气、雪或冰的影响。
注: 有关 WAVS 的更详细的资料，请参阅操作和保养手册, SEBU8157, "工作区域视像系统"。
Caterpillar Information System:
2007/12/31 A Improvement to Circuit for the Brake Lamp Has Been Made {1432, 4493}
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 07
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 06
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 05
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 02
Procedure to Install the New Heater Elements on Asphalt Screeds{6643, 664E} Procedure to Install the New Heater Elements on Asphalt Screeds{6643, 664E}
2007/12/31 Stronger Bolts and Studs Available for Brake Packs {4251}
3500 Spark Ignited Engines Water Pump
Blistering Monarch Hoses{4304, 5057} Blistering Monarch Hoses{4304, 5057}
24M Motor Grader Machine Systems Hydraulic Tank and Filter - Install
24M Motor Grader Machine Systems Hydraulic Tank and Filter - Remove
450E Backhoe Loader Backup Alarm Always Off
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0041 - FMI 03
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0041 - FMI 04
PM-201 Cold Planer Machine Systems Hydraulic Cylinder (Elevation) - Remove and Install
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0070 - FMI 03
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Control Manifold (High Flow)
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0070 - FMI 04
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0177 - FMI 03
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0177 - FMI 04
2008/02/04 An Improved Assembly Process for Load Check Valves is Available {5051}
C7 Petroleum Engines Air Inlet Elbow
C7 Petroleum Engines Air Inlet Elbow
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0006 FMI 02