CID 0005 FMI 02
产生此代码的情况:
该诊断代码仅适用于 C6.6发动机。
电子控制模块（ECM）可检测以下状况：
- 5 号气缸的电子单体喷射器数据 超出限值。
- 诊断代码 0168-01 未激活。
- 诊断代码 0005-05 和
0005-06未激活。
- 0041 诊断代码未激活。
- 0262 诊断代码未激活。
- 诊断代码 0190-08 未激活。
- 0110 诊断代码未激活。
系统响应:
控制面板显示屏会出现一条警告。 将生成激活的诊断代码。 ECM 将会记录此诊断代码。
该故障诊断代码激活后，发动机将减额运行。
测试步骤 1. 进行以下的诊断步骤: 喷射器数据错误 - 测试
结果:
- 正常 - 停止
Caterpillar Information System:
Procedure to Install the New Heater Elements on Asphalt Screeds{6643, 664E} Procedure to Install the New Heater Elements on Asphalt Screeds{6643, 664E}
2007/12/31 Stronger Bolts and Studs Available for Brake Packs {4251}
3500 Spark Ignited Engines Water Pump
Blistering Monarch Hoses{4304, 5057} Blistering Monarch Hoses{4304, 5057}
24M Motor Grader Machine Systems Hydraulic Tank and Filter - Install
24M Motor Grader Machine Systems Hydraulic Tank and Filter - Remove
450E Backhoe Loader Backup Alarm Always Off
Problems Reported with Wheel Lean Bar{4305, 4313, 5225} Problems Reported with Wheel Lean Bar{4305, 4313, 5225}
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Cleaner Bar Tips - Replace - If Equipped
2007/12/31 Revised Maintenance Interval Schedule For Lubricating The Sheave Block Bearing {5415, 5418}
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Cleaner Bar - Check/Adjust - If Equipped
2008/06/23 Improved Mounting Caps for the Idlers and Rollers are now Used {4159, 4180}
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 05
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 06
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 07
2007/12/31 A Improvement to Circuit for the Brake Lamp Has Been Made {1432, 4493}
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Display and Camera - Clean - If Equipped
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0041 - FMI 03
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0041 - FMI 04
PM-201 Cold Planer Machine Systems Hydraulic Cylinder (Elevation) - Remove and Install
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0070 - FMI 03
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Control Manifold (High Flow)
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0070 - FMI 04
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0177 - FMI 03