Bottom Guard - Remove and Install
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 1U-7505 | 液压千斤顶 | 1 |
- 利用工具 (A) 支撑底部防护罩 (1) 。 底部防护罩 (1) 的重量约为 154 kg (340 lb)。
Show/hide table
 | |
| 图 1 | g01441725 |
- 拆下螺栓 (2) 和盖 (3) 。 在对面重新执行此步骤。
- 拆下销组件 (4) 和销 (5) 。 在对面重新执行此步骤。
Show/hide table
 | |
| 图 2 | g01441647 |
- 拆下螺栓 (6) 和螺栓 (7) 。 利用工具 (A) 拆下底部防护罩 (1) 。
Show/hide table
 | |
| 图 3 | g01441743 |
安装步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 1U-7505 | 液压千斤顶 | 1 |
- 采用工具 (A) 安装底部防护罩 (1) 。 底部防护罩 (1) 的重量约为 154 kg (340 lb)。 安装螺栓 (7) 和螺栓 (6) 。
Show/hide table
| | |
| 图 4 | g01441743 |
- 安装销 (5) 和销组件 (4) 。 在对面重新执行此步骤。
Show/hide table
| | |
| 图 5 | g01441647 |
- 安装盖 (3) 和螺栓 (2) 。 在对面重新执行此步骤。
Show/hide table
| | |
| 图 6 | g01441725 |
- 将工具 (A) 从底部防护罩 (1) 上拆下。
Caterpillar Information System:
3508B Engine for Caterpillar Built Machines Crankcase Breather
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Engine Speed/Timing Sensor
2008/12/15 Correction to Systems Operation , "Power Train Electronic Control System" {4800, 7610}
2007/12/24 An Improved Pump Control Valve Is Available for the High Flow Work Tool Pump on Certain Multi Terrain Loaders and Skid Steer Loaders {5070, 5455}
2008/02/04 Correction to Systems Operation , "Power Train Electronic Control System" {4800, 7610}
R1700G Load Haul Dump Before Starting Engine
2007/12/17 A New Lens is Available for the Rear Tail Lamp {1429, 1434}
450E Backhoe Loader Hydraulic and Steering System Multipurpose Bucket Cylinder
24M Motor Grader Engine Supplement Muffler - Remove and Install
2010/10/13 Four Bearings Are Now Used On the Hydraulic Control Support (Armrest) {5258}
24M Motor Grader Machine Systems Oil Filter and Base (Hydraulic) - Install - Power Train
24M Motor Grader Power Train Relief Valve - Assemble - Differential Lock
PM-201 Cold Planer Machine Systems Track - Separate
PM-201 Cold Planer Machine Systems Track - Connect
450E Backhoe Loader Diagnostic Code List
C4.4 and C6.6 Engines for Caterpillar Built Machines Sensors and Electrical Connectors
C4.4 and C6.6 Engines for Caterpillar Built Machines Engine Wiring Information
450E Backhoe Loader MID 039 - CID 0041 - FMI 03
C175-16 Locomotive Engine Electric Starting Motor
450E Backhoe Loader MID 039 - CID 0041 - FMI 04
PM-201 Cold Planer Machine Systems Conveyor Idler (Second Stage) - Remove and Install
2008/05/12 An Improved Pinion Shaft with a New Rugged Bolted Joint Provides Consistent Torque on the Circle Drive {5207}
2008/05/12 An Improved Pinion Shaft with a New Rugged Bolted Joint Provides Consistent Torque on the Circle Drive {5207}
Topcon® System Five Safety Messages