Service Support - Remove and Install
Removal Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 8S-7615 | Pin | 2 |
| 8S-7630 | Stand | 2 | |
| 8S-7641 | Tube | 2 | |
- Raise the machine until the service support can be disengaged. Support the main frame with Tooling (A) .
Show/hide table
 | |
| Illustration 1 | g01440174 |
- Remove bolt (2), bolt (1), and the washers.
Show/hide table
 | |
| Illustration 2 | g01430077 |
- Remove service support (3) .
Installation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 8S-7615 | Pin | 1 |
| 8S-7630 | Stand | 1 | |
| 8S-7641 | Tube | 1 | |
- Install service support (3) .
Show/hide table
| | |
| Illustration 3 | g01430077 |
- Install the washers, bolt (1), and bolts (2) .
- Raise the machine until Tooling (A) can be removed. Engage the service support.
Show/hide table
| | |
| Illustration 4 | g01440174 |
Caterpillar Information System:
PM-201 Cold Planer Machine Systems Steering Linkage - Remove and Install
725, 730 and 730 EJECTOR Articulated Trucks Power Train Differential and Bevel Gear (Center) - Assemble
725, 730 and 730 EJECTOR Articulated Trucks Power Train Differential and Bevel Gear (Center) - Disassemble
725, 730 and 730 EJECTOR Articulated Trucks Power Train Differential and Bevel Gear (Front and Rear) - Assemble
725, 730 and 730 EJECTOR Articulated Trucks Power Train Differential and Bevel Gear (Front and Rear) - Disassemble
2007/11/26 An Orifice in the Brake Line Improves the Performance of the Parking Brake Switch {1408, 4257, 4267}
2007/11/12 Correction to Operation and Maintenance Manuals for the E Series Backhoe Loaders {7300, 7451}
450E Backhoe Loader Hydraulic and Steering System Control Valve (Extendable Stick) (Pilot Operated)
785D OEM Off-Highway Truck Drive Shaft Slip Joint - Lubricate
AS2252C Asphalt Screed Power Adjuster Motor (Height)
PM-201 Cold Planer Machine Systems Rotor Drive Idler - Assemble
PM-201 Cold Planer Machine Systems Rotor Drive Idler - Disassemble
785D OEM Off-Highway Truck Engine Air Filter Primary Element - Clean/Replace
120M and 12M Motor Grader Machine Systems Bank Valve - Install - Rear Frame
785D OEM Off-Highway Truck Engine Air Filter Service Indicator - Inspect
AP655D Asphalt Paver Propel System Location of Electrical Components (Propel System)
3516B Engine for 994F and 994H Wheel Loaders Fuel Consumption Is Excessive
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290} Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
CB22, CB24, CB32 and CC24 Utility Compactors Hydraulic Tank Breather - Clean
785D OEM Off-Highway Truck Engine Air Precleaner - Clean
785D OEM Off-Highway Truck Engine Crankcase Breather - Clean
2008/02/18 New Tooling is Available to Assist During Disassembly and Assembly of the Ejector Bucket {6128}
New Abrasion Sleeve for the Cooler Hose of the Transmission{1375} New Abrasion Sleeve for the Cooler Hose of the Transmission{1375}
2007/12/24 An Improved Radiator Mount is Now Used on Paving Compactors {1351, 1353, 1374}