CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Caterpillar

Illustration 1	g01420639

(1) Torque for bolt ... 400 ± 50 N·m (295 ± 37 lb ft)

(2) Shim the arm, as required.

Shim

Quantity for each side ... 2

Thickness ... 1.6 mm (0.063 inch)

(3) Torque for bolt ... 400 ± 50 N·m (295 ± 37 lb ft)

Note: The following procedure is for installing and shimming the blade arms.

1. Assemble the components of each arm in section A-A.

2. Tighten the center bolt.

3. Position the blade under the yoke and align with side plates of the yoke.

4. Vertically level the outer face of the blade support.

5. Use a level to verify that the blade is level.

6. Use shims (2) to fill the gap, as required.