Service and Parking Brake (Front) - Install
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 138-7575     | 连杆支架     | 2     |
B     | 1U-9200     | 操纵杆滚轮起重机     | 1     |
C     | 9S-3263     | 螺纹锁固胶     | -     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
注: 检查 O 形密封圈。 更换磨损或损坏的 O 形密封环。
- 安装 O 形密封圈 (6) 。
Show/hide table
图 1 | g01415975 |
- 使用工具 (A) 、工具 (B) 和适当的起吊设备安装前制动器组件 (1) 。 前制动器组件 (1) 的重量约为 840 kg (1852 lb)。
Show/hide table
图 2 | g01412528 |
- 安装护圈 (5) 。 将工具 (C) 涂敷到螺栓 (4) 上。 安装螺栓 (4) 。
Show/hide table
图 3 | g01415945 |
- 安装支架 (3) 。 安装管组件 (2) 。
Show/hide table
图 4 | g01415937 |
End By: 安装前轮轴承和 Duo-cone 密封件。 请参阅 拆解和组装, "前轮轴承 - 安装"。
Caterpillar Information System:
793D Off-Highway Truck/Tractor Service and Parking Brake (Front) - Remove
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Ride Control Accumulator - Test and Charge
3176C Engine for the R1600G and the R1700G Load Haul Dumps Speed Control (Remote Throttle) - Test
3176C Engine for the R1600G and the R1700G Load Haul Dumps Power Is Intermittently Low or Power Cutout Is Intermittent
3176C Engine for the R1600G and the R1700G Load Haul Dumps Oil Pressure Is Low
140H and 160H Motor Graders Changing Direction and Speed
2007/09/24 An Improved Fuse and ARC Suppressor is Now Used in the Axle Oil Cooler Wiring Harness {1365, 1408}
R1600G Load Haul Dump Machine Systems Tilt Lever and Tilt Link - Install
R1600G Load Haul Dump Machine Systems Tilt Lever and Tilt Link - Remove
R1600G Load Haul Dump Machine Systems Main Control Valve - Install
R1600G Load Haul Dump Machine Systems Main Control Valve - Remove
R1600G Load Haul Dump Machine Systems Steering Cylinder - Remove
793D Off-Highway Truck/Tractor Service and Parking Brake (Front) - Disassemble
793D Off-Highway Truck/Tractor Service and Parking Brake (Front) - Assemble
793C Off-Highway Truck Machine Systems Front Suspension (Cylinder) - Remove
793C Off-Highway Truck Machine Systems Front Suspension (Cylinder) - Install
793D Off-Highway Truck/Tractor Front Suspension (Cylinder) - Remove
793D Off-Highway Truck/Tractor Front Suspension (Cylinder) - Install
160M Motor Grader Machine Systems Steering Cylinder - Remove and Install
140M Motor Grader Engine Supplement Water Temperature Regulator - Remove and Install
CP76 and CS76 Vibratory Compactors Propel System Case Drain Flow for Piston Motor (Drum Propel) - Test
2007/08/27 New AccuGrade ® Software is Now Available {7220, 7620}
CS54 and CP54 Vibratory Soil Compactors Fuel System Secondary Filter - Replace
CP76 and CS76 Vibratory Compactors Propel System Case Drain Flow for Piston Motor (Axle Propel) - Test