Transmission and Bevel Gears - Install
Installation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | FT-1897 | Bracket As | 1 |
| 138-7575 | Link Bracket | 1 | |
| 8S-9089 | Bolt | 1 | |
| 1D-4719 | Full Nut | 1 | |
| B | 5J-0490 | Bolt | 1 |
| C | 4C-6486 | Stand | 1 |
| 8S-7611 | Tube | 1 | |
| 8S-8048 | Saddle | 1 | |
| 8S-7615 | Pin | 1 | |
| D | 138-7574 | Link Bracket | 2 |
| E | 1U-9200 | Lever Puller Hoist | 2 |
| 138-7575 | Link Bracket | 2 | |
- Attach Tooling (D) and a suitable lifting device onto transmission and bevel gear (12). The weight of transmission and bevel gear (12) is approximately 907 kg (2000 lb).
Show/hide table
 | |
| Illustration 1 | g01390602 |
- Position transmission and bevel gear (12) into the frame. Install Tooling (A). Place Tooling (A) onto Tooling (C) .
Show/hide table
 | |
| Illustration 2 | g01390607 |
- Remove Tooling (D) .
Show/hide table
| | |
| Illustration 3 | g01390602 |
- Attach a suitable lifting device onto Tooling (A) .
Show/hide table
 | |
| Illustration 4 | g01390234 |
- Attach Tooling (E) onto transmission and bevel gear (12) .
Show/hide table
 | |
| Illustration 5 | g01390719 |
- Lift Tooling (A) in order to remove Tooling (C). Use Tooling (E) in order to move transmission and bevel gear (12) into position.
- Install bolts (13) into transmission and bevel gear (12). Do not move bolts (14) .
Show/hide table
 | |
| Illustration 6 | g01390235 |
- Remove the suitable lifting device and Tooling (A) .
Show/hide table
| | |
| Illustration 7 | g01390234 |
- Install cover (11) .
Show/hide table
 | |
| Illustration 8 | g01390227 |
- Position cable assemblies (8) and (10). Install bolts (7) and (9) .
Show/hide table
 | |
| Illustration 9 | g01390213 |
- Install pin assemblies (5) and (6) .
Show/hide table
 | |
| Illustration 10 | g01390209 |
- Install cover (4) .
Show/hide table
 | |
| Illustration 11 | g01390206 |
- Install plate (3). Install bolts (2). Install yoke (1) .
Show/hide table
 | |
| Illustration 12 | g01390205 |
Caterpillar Information System:
587R Pipelayer Power Train Transmission and Bevel Gears - Remove
C15 and C18 Generator Set Engines Fan Guard - Remove and Install
16M Motor Grader Power Train Transmission Oil Cooler - Install
16M Motor Grader Power Train Transmission Oil Cooler - Remove
2007/07/16 Improved Walkways are Available {7255}
24M Motor Grader Power Train Electronic Control System MID 027 - CID 1639 - FMI 09
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Priority Valve - Inlet Manifold of the Loader
AS3251C Asphalt Screed Screed Components
16M Motor Grader Power Train Transmission Oil Filter Base - Install
16M Motor Grader Power Train Transmission Oil Filter Base - Remove
2007/06/25 Correction to Operation and Maintenance Manual , "Hoist System and Brake System Oil Level - Check" {5056}
AS3251C Asphalt Screed Operator Controls
AS4251C Asphalt Paver Specifications
C15 and C18 Generator Set Engines Fan - Remove and Install
AS3251C Asphalt Screed Screed Control System
24M Motor Grader Hydraulic and Steering System Control Manifold (Implement, Steering)
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Valve (Lift)
AP655D and BG655D Asphalt Pavers Propel System Piston Pump Flow - Test - Steel Track
AS4251C Asphalt Paver Plate Locations and Film Locations
EquipmentManager Dealer Administrator Manual Setup Subscriptions
773F and 775F Off-Highway Truck Radio Mount
AccuGrade® Laser (CB420) AS 1 Memory Fault
Replacement of the Cover Assembly on the Cab Door{7308} Replacement of the Cover Assembly on the Cab Door{7308}
Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}