Transmission and Bevel Gears - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | FT-1897     | Bracket As     | 1     |
138-7575 | Link Bracket     | 1     | |
8S-9089 | Bolt     | 1     | |
1D-4719 | Full Nut     | 1     | |
B     | 5J-0490     | Bolt     | 1     |
C     | 4C-6486     | Stand     | 1     |
8S-7611 | Tube     | 1     | |
8S-8048 | Saddle     | 1     | |
8S-7615 | Pin     | 1     | |
D     | 138-7574     | Link Bracket     | 2     |
Start By:
- Remove the drive axles. Refer to Disassembly and Assembly, "Drive Axles - Remove".
- Remove the main drive shaft. Refer to Disassembly and Assembly, "Drive Shaft (Main) - Remove".
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Remove yoke assembly (1). Remove bolts (2). Remove plate (3) .
Show/hide table
Illustration 1 | g01390205 |
- Remove cover (4) .
Show/hide table
Illustration 2 | g01390206 |
- Place the transmission into third gear. Remove pin assemblies (5) and (6) .
Show/hide table
Illustration 3 | g01390209 |
- Remove bolts (7) and (9). Position cable assemblies (8) and (10) out of the way.
Show/hide table
Illustration 4 | g01390213 |
- Remove cover (11) .
Show/hide table
Illustration 5 | g01390227 |
- Attach Tooling (A) and a suitable lifting device onto the transmission and bevel gear. The weight of transmission and bevel gear (12) is approximately 907 kg (2000 lb).
Show/hide table
Illustration 6 | g01390234 |
- Do not remove bolt (14). Remove bolts (13) .
Show/hide table
Illustration 7 | g01390235 |
- Install Tooling (B). Use Tooling (B) to separate transmission and bevel gear (12) from the frame.
Show/hide table
Illustration 8 | g01390238 |
- Move transmission and bevel gear (12) out of the machine. Place Tooling (A) onto Tooling (C) .
Show/hide table
Illustration 9 | g01390607 |
- Attach Tooling (D) and a suitable lifting device onto transmission and bevel gear (12). The weight of transmission and bevel gear (12) is approximately 907 kg (2000 lb). Remove transmission and bevel gear (12) .
Show/hide table
Illustration 10 | g01390602 |
Caterpillar Information System:
C15 and C18 Generator Set Engines Fan Guard - Remove and Install
16M Motor Grader Power Train Transmission Oil Cooler - Install
16M Motor Grader Power Train Transmission Oil Cooler - Remove
2007/07/16 Improved Walkways are Available {7255}
24M Motor Grader Power Train Electronic Control System MID 027 - CID 1639 - FMI 09
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Priority Valve - Inlet Manifold of the Loader
AS3251C Asphalt Screed Screed Components
16M Motor Grader Power Train Transmission Oil Filter Base - Install
16M Motor Grader Power Train Transmission Oil Filter Base - Remove
2007/06/25 Correction to Operation and Maintenance Manual , "Hoist System and Brake System Oil Level - Check" {5056}
AS3251C Asphalt Screed Operator Controls
Procedure to Install Forward/Neutral/Reverse (FNR) Switch{5702, 7332} Procedure to Install Forward/Neutral/Reverse (FNR) Switch{5702, 7332}
587R Pipelayer Power Train Transmission and Bevel Gears - Install
AS4251C Asphalt Paver Specifications
C15 and C18 Generator Set Engines Fan - Remove and Install
AS3251C Asphalt Screed Screed Control System
24M Motor Grader Hydraulic and Steering System Control Manifold (Implement, Steering)
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Valve (Lift)
AP655D and BG655D Asphalt Pavers Propel System Piston Pump Flow - Test - Steel Track
AS4251C Asphalt Paver Plate Locations and Film Locations
EquipmentManager Dealer Administrator Manual Setup Subscriptions
773F and 775F Off-Highway Truck Radio Mount
AccuGrade® Laser (CB420) AS 1 Memory Fault
Replacement of the Cover Assembly on the Cab Door{7308} Replacement of the Cover Assembly on the Cab Door{7308}