2007/07/16 Caterpillar


Improved Walkways are Available {7255}

Usage:

793C 4AR
Off-Highway Truck:
793C (S/N: CBR1-UP; 4AR1-UP; ATY1-UP; 4GZ1-UP)

ReferenceSpecial Instruction, REHS3712, "Installation of Improved Catwalks on 793C Off-Highway Trucks"

Improved walkways are now available. The gussets on the underside of the walkways have been modified in order to better support the walkways. The gussets are now mounted to the side and bottom of the ROPS. An additional brace was added at the base of the mirror mounting bracket in order to support the heavier mirror and the handrail.

For a complete list of the parts that are needed in order to install the improved walkways and the proper procedures that are needed in order to install the improved walkways, refer to Special Instruction, REHS3712, "Installation of Improved Catwalks on 793C Off-Highway Trucks". This Special Instruction explains the installation of the improved walkways on the 793C and 793C XQ Off-Highway Trucks.

Caterpillar Information System:

24M Motor Grader Power Train Electronic Control System MID 027 - CID 1639 - FMI 09
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Priority Valve - Inlet Manifold of the Loader
AS3251C Asphalt Screed Screed Components
16M Motor Grader Power Train Transmission Oil Filter Base - Install
16M Motor Grader Power Train Transmission Oil Filter Base - Remove
2007/06/25 Correction to Operation and Maintenance Manual , "Hoist System and Brake System Oil Level - Check" {5056}
AS3251C Asphalt Screed Operator Controls
Procedure to Install Forward/Neutral/Reverse (FNR) Switch{5702, 7332} Procedure to Install Forward/Neutral/Reverse (FNR) Switch{5702, 7332}
AS3251C Asphalt Screed Electronic Control Module (Screed)
C4.4 and C6.6 Engines for Caterpillar Built Machines Engine Wiring Information
16M Motor Grader Power Train Rear Axle, Differential and Final Drive - Install
16M Motor Grader Power Train Rear Axle, Differential and Final Drive - Remove
16M Motor Grader Power Train Transmission Oil Cooler - Remove
16M Motor Grader Power Train Transmission Oil Cooler - Install
C15 and C18 Generator Set Engines Fan Guard - Remove and Install
587R Pipelayer Power Train Transmission and Bevel Gears - Remove
587R Pipelayer Power Train Transmission and Bevel Gears - Install
AS4251C Asphalt Paver Specifications
C15 and C18 Generator Set Engines Fan - Remove and Install
AS3251C Asphalt Screed Screed Control System
24M Motor Grader Hydraulic and Steering System Control Manifold (Implement, Steering)
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Valve (Lift)
AP655D and BG655D Asphalt Pavers Propel System Piston Pump Flow - Test - Steel Track
AS4251C Asphalt Paver Plate Locations and Film Locations
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.