Gerotor Motor (Drum Propel) - Disassemble
Disassembly Procedure
Start By:
- Remove the gerotor motor (drum propel). Refer to Disassembly and Assembly, "Gerotor Motor (Drum Propel) - Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
- Remove O-ring seal (3) and bolts (1) from gerotor motor (2) .
Show/hide table
Illustration 1 | g01389868 |
- Remove flange (4) and O-ring seal (5) from housing (6) .
Show/hide table
Illustration 2 | g01389869 |
- Remove shaft (7) from housing (6) .
Show/hide table
Illustration 3 | g01389870 |
- Remove rotor housing (8) from housing (6) .
Show/hide table
Illustration 4 | g01389871 |
- Remove O-ring seal (9) from rotor housing (8) .
Show/hide table
Illustration 5 | g01389873 |
- Remove shaft housing (10) from housing (6) .
Show/hide table
Illustration 6 | g01389874 |
- Remove bolts (11) and O-ring seal (12) from shaft housing (10) .
Show/hide table
Illustration 7 | g01389875 |
- Remove shaft (13) from housing (6) .
Show/hide table
Illustration 8 | g01389876 |
- Remove flange (14) from housing (6) .
Show/hide table
Illustration 9 | g01389878 |
- Remove pin (15) from housing (6) .
Show/hide table
Illustration 10 | g01389879 |
- Remove flange (16) from housing (6). Remove O-ring seals (17) from flange (16) .
Show/hide table
Illustration 11 | g01389880 |
Caterpillar Information System:
CB14 Paving Compactor Machine Systems Gerotor Motor (Drum Propel) - Install
770 and 772 Off-Highway Truck/Tractors Center Arm (Steering) - Remove and Install
CB14 Paving Compactor Machine Systems Gerotor Motor (Drum Propel) - Remove
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Position Sender (Articulation)
EquipmentManager User Guide General Information
EquipmentManager Dealer Administrator Manual Planned Maintenance
587R Pipelayer Power Train Torque Converter Outlet Relief Valve - Install
CS54 and CP54 Vibratory Soil Compactors Parking Brake - Check
24M Motor Grader Hydraulic and Steering System Disc Pack Preload for Circle Drive - Adjust
770 and 772 Off-Highway Truck/Tractors Steering Cylinder - Remove and Install
770 and 772 Off-Highway Truck/Tractors Steering Column - Assemble
770 and 772 Off-Highway Truck/Tractors Steering Column - Disassemble
CB14 Paving Compactor Machine Systems Gerotor Motor (Drum Propel) - Assemble
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100} Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
541 Track Feller Buncher, 551 Track Feller Buncher and 552 Track Feller Buncher Machine Systems Travel System
2007/06/18 A New Design of the Lever for Locking the Control Pod Improves Reliability on Certain Backhoe Loaders {5258}
AccuGrade® Laser (CB420) Service Tools
Filtration Procedure for B & D Series Telescopic Handler Hydraulic Oil {0680, 0768, 5050, 5056} Filtration Procedure for B & D Series Telescopic Handler Hydraulic Oil {0680, 0768, 5050, 5056}
AccuGrade® Laser (CB420) Determining Detected Faults (Electronic Service Tool)
541 Track Feller Buncher, 551 Track Feller Buncher and 552 Track Feller Buncher Machine Systems Swing System
938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Transmission Hydraulic System
CS54 and CP54 Vibratory Soil Compactors Hydraulic Tank Vent - Replace
938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Transmission Oil Pump
938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Oil Filter (Power Train)