CB14 Paving Compactor Machine Systems Caterpillar


Gerotor Motor (Drum Propel) - Install

Usage:

CB-14 DST

Installation Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     6V-2082     Lifting Hook     1    



    Illustration 1g01388674

  1. Install gerotor motor (1) and bolts (13) on final drive assembly (12) .



    Illustration 2g01388537

  1. Install plate (10) and bolts (11) on final drive assembly (12) .



    Illustration 3g01388534

  1. Attach Tooling (A) to support assembly (9). Install support assembly (9) and bolts (8). The weight of support assembly (9) is approximately 32 kg (70 lb).



    Illustration 4g01388532

  1. Attach a suitable lifting device to drum support (5). Install drum support (5), bolts (6), and bolts (7). The weight of drum support (5) is approximately 50 kg (110 lb).

  1. Raise the machine slightly. Remove the blocks, and lower the machine to the ground.



    Illustration 5g01388584

  1. Install cover (4) and bolts (3) .



    Illustration 6g01388530

  1. Connect hose assemblies (2) to gerotor motor (1) .

Caterpillar Information System:

770 and 772 Off-Highway Truck/Tractors Center Arm (Steering) - Remove and Install
CB14 Paving Compactor Machine Systems Gerotor Motor (Drum Propel) - Remove
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Position Sender (Articulation)
EquipmentManager User Guide General Information
EquipmentManager Dealer Administrator Manual Planned Maintenance
587R Pipelayer Power Train Torque Converter Outlet Relief Valve - Install
CS54 and CP54 Vibratory Soil Compactors Parking Brake - Check
24M Motor Grader Hydraulic and Steering System Disc Pack Preload for Circle Drive - Adjust
770 and 772 Off-Highway Truck/Tractors Steering Cylinder - Remove and Install
770 and 772 Off-Highway Truck/Tractors Steering Column - Assemble
770 and 772 Off-Highway Truck/Tractors Steering Column - Disassemble
CB14 Paving Compactor Machine Systems Spray Bar - Remove and Install
CB14 Paving Compactor Machine Systems Gerotor Motor (Drum Propel) - Disassemble
CB14 Paving Compactor Machine Systems Gerotor Motor (Drum Propel) - Assemble
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100} Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
541 Track Feller Buncher, 551 Track Feller Buncher and 552 Track Feller Buncher Machine Systems Travel System
2007/06/18 A New Design of the Lever for Locking the Control Pod Improves Reliability on Certain Backhoe Loaders {5258}
AccuGrade® Laser (CB420) Service Tools
Filtration Procedure for B & D Series Telescopic Handler Hydraulic Oil {0680, 0768, 5050, 5056} Filtration Procedure for B & D Series Telescopic Handler Hydraulic Oil {0680, 0768, 5050, 5056}
AccuGrade® Laser (CB420) Determining Detected Faults (Electronic Service Tool)
541 Track Feller Buncher, 551 Track Feller Buncher and 552 Track Feller Buncher Machine Systems Swing System
938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Transmission Hydraulic System
CS54 and CP54 Vibratory Soil Compactors Hydraulic Tank Vent - Replace
938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Transmission Oil Pump
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.