IT38H Integrated Toolcarrier and 938H Wheel Loader Power Train Caterpillar

Installation Procedure

Show/hide table



Illustration 1	g01360524

Show/hide table



Illustration 2	g01360560

1. Install Tooling (B) and a suitable lifting device to rear axle assembly (18). The weight of rear axle assembly (18) is approximately 1225 kg (2700 lb). Position rear axle assembly (18) and install bolts (19). Repeat for the other support. Use Tooling (C) in order to tighten bolts (14) to a torque of 1000 ± 125 N·m (737 ± 92 lb ft).

Show/hide table



Illustration 3	g01360522
Top of the axle

2. Install clamp (17) and connect hose assembly (17) .

Show/hide table



Illustration 4	g01360504
Top of the axle

3. Install clamp (15). Connect hose assembly (14) .

Show/hide table



Illustration 5	g01360517

4. Connect tube assembly (13). Install clamp (12) .

Show/hide table



Illustration 6	g01360489

5. Install cable strap (6) and connect harness assembly (8). Connect hose assemblies (7) and (9). Install guards (10) and (11) .

Show/hide table



Illustration 7	g01360488

6. Position harness assembly (4) and install clips (5) .

Show/hide table



Illustration 8	g01360487

7. Pull harness assembly (4) through the brake housing and connect harness assembly (4) .

Show/hide table



Illustration 9	g01360486

8. Install guard (3) .

Show/hide table



Illustration 10	g01360485

9. Place rear drive shaft (2) into position. Connect rear drive shaft (2). Install bolts (1). Hand tighten all bolts (1). Tighten bolts (1) by using an crisscross pattern to a torque of 71 ± 10 N·m (52 ± 7 lb ft).

End By: Install the rear tires. Refer to Disassembly and Assembly, "Tire and Rim (Rear) - Install".