Engine Oil Level - Check
- 使用油尺 (2) 检查油位。
Show/hide table
图 1 | g01358987 |
- 使油尺上的油位保持在"满 (FULL)" 标记与"添加 (ADD)" 标记之间。
Show/hide table
注意 |
---|
曲轴箱不要充油过满。 油位不能超过油尺的全满(FULL RANGE)位置。 |
- 清洁加注口盖 (1) 。 拆下机油加注口盖。 必要时,加油。
- 安装加注口盖 (1) 。
Caterpillar Information System:
AP655D and BG655D Asphalt Pavers Engine Mounts - Inspect
D6K Track-Type Tractor Power Train Track Adjuster - Disassemble
773D Off-Highway Truck Power Train Electronic Control Module (Power Train) - Remove and Install
14L Motor Grader Machine Systems Seat - Remove and Install
Payload Control System (PCS) 2.X Payload Control System/PC Off-Board System
Payload Control System (PCS) 2.X Calibration
Payload Control System (PCS) 2.X Sensors
Procedure for Updating the Time Zone on CAESultra 3rd Party Radios{733T, 7490, 7604} Procedure for Updating the Time Zone on CAESultra 3rd Party Radios{733T, 7490, 7604}
C9.3 Engines for Caterpillar Built Machines Water Pump - Assemble
Time Zone needs to be Updated on CAESultra{7490, 7604} Time Zone needs to be Updated on CAESultra{7490, 7604}
AP655D and BG655D Asphalt Pavers Engine Crankcase Breather - Clean
AP655D and BG655D Asphalt Pavers Engine Air Filter Service Indicator - Inspect
AP655D and BG655D Asphalt Pavers Engine Oil Sample - Obtain
AP655D and BG655D Asphalt Pavers Engine Oil and Filter - Change
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Plate Locations and Film Locations
587T PipelayerEngine Supplement Radiator Guard - Tilt
587T PipelayerEngine Supplement Radiator Guard - Tilt Back
2007/03/12 Correction to the Parts Manual, Rocker Arm Gp {1123}
C4.4 (Mech) Industrial Engine Product Lifting
C4.4 (Mech) Industrial Engine Engine Oil Level - Check
C4.4 (Mech) Industrial Engine Engine Description
C4.4 and C6.6 Engines for Caterpillar Built Machines E360 Low Engine Oil Pressure
C4.4 (Mech) Industrial Engine Engine Operation
C4.4 (Mech) Industrial Engine Overhaul Considerations