Engine Mounts - Inspect
Show/hide table
 | |
| 图 1 | g01358985 |
发动机有四个安装支座。 务必要检查每个安装支座。
检查发动机安装支座是否损坏。
检查发动机安装支座的螺栓扭矩是否正确。
发动机安装不当，会引起发动机振动。 发动机的安装支座松动或安装支座损坏可能会引起发动机振动。
如果发动机安装支座损坏，则进行更换。
如果安装支座松动，则要拧紧发动机的前后安装支座，使螺栓扭矩达到 460 ± 60 N·m (340 ± 40 lb ft)。
Caterpillar Information System:
D6K Track-Type Tractor Power Train Track Adjuster - Disassemble
773D Off-Highway Truck Power Train Electronic Control Module (Power Train) - Remove and Install
14L Motor Grader Machine Systems Seat - Remove and Install
Payload Control System (PCS) 2.X Payload Control System/PC Off-Board System
Payload Control System (PCS) 2.X Calibration
Payload Control System (PCS) 2.X Sensors
Procedure for Updating the Time Zone on CAESultra 3rd Party Radios{733T, 7490, 7604} Procedure for Updating the Time Zone on CAESultra 3rd Party Radios{733T, 7490, 7604}
C9.3 Engines for Caterpillar Built Machines Water Pump - Assemble
Time Zone needs to be Updated on CAESultra{7490, 7604} Time Zone needs to be Updated on CAESultra{7490, 7604}
AP655D and BG655D Asphalt Pavers Engine Crankcase Breather - Clean
AP655D and BG655D Asphalt Pavers Engine Air Filter Service Indicator - Inspect
AP655D and BG655D Asphalt Pavers Propel System Pump Synchronization - Test and Adjust
AP655D and BG655D Asphalt Pavers Engine Oil Level - Check
AP655D and BG655D Asphalt Pavers Engine Oil Sample - Obtain
AP655D and BG655D Asphalt Pavers Engine Oil and Filter - Change
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Plate Locations and Film Locations
587T PipelayerEngine Supplement Radiator Guard - Tilt
587T PipelayerEngine Supplement Radiator Guard - Tilt Back
2007/03/12 Correction to the Parts Manual, Rocker Arm Gp {1123}
C4.4 (Mech) Industrial Engine Product Lifting
C4.4 (Mech) Industrial Engine Engine Oil Level - Check
C4.4 (Mech) Industrial Engine Engine Description
C4.4 and C6.6 Engines for Caterpillar Built Machines E360 Low Engine Oil Pressure
C4.4 (Mech) Industrial Engine Engine Operation