IT38H Integrated Toolcarrier and 938H Wheel Loader Machine Systems Caterpillar

Installation Procedure

Show/hide table

Illustration 1	g01344253

Show/hide table

Illustration 2	g01344248

1. Attach Tooling (B) and a suitable lifting device to hydraulic tank (15). The weight of hydraulic tank (15) is approximately 155 kg (340 lb). Install hydraulic tank (15).
   Show/hide table

   Illustration 3	g01344252

2. Install mounting bolts (16). Repeat for the other side.
   Show/hide table

   Illustration 4	g01344197

3. Connect hose assemblies (13) and (14) to the bottom of the hydraulic tank. Hose assembly (13) should be installed so that the red circular indicator that is located on the hose fitting is no longer visible.
   Show/hide table

   Illustration 5	g01344171

4. Connect hose assembly (12).
   Show/hide table

   Illustration 6	g01344168

5. Connect hose assembly (10). Connect tube assembly (9). Connect hose assemblies (8) and (11). Connect harness assembly (7). Install cable straps (6). Hose assembly (10) should be installed so that the red circular indicator that is located on the hose fitting is no longer visible.
   Show/hide table

   Illustration 7	g01344166

6. Connect hose assembly (4). Connect hose assemblies (1), (2) and (3). Hose assembly (4) should be installed so that the red circular indicator that is located on the hose fitting is no longer visible.

7. Fill the hydraulic oil system. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".

End By:

1. Install the cab. Refer to Disassembly and Assembly, "Cab - Install".

2. Install the air cleaner. Refer to Disassembly and Assembly, "Air Cleaner - Remove and Install".