Bogie Suspension - Install - Level 2
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 422-2352     | Jack Stand Gp     | 4     |
- Raise the machine and position Tooling (A) under the machine in the front and the rear of the machine.
Show/hide table
Illustration 1 | g01336428 |
- Position carriage assemblies (4). Install the top bolts (3) and the inner most bottom bolt (3). Do not tighten bolts (3) at this time. Install the upper rubber cords (5). Spread carriage assemblies (4) in order to install the bottom rubber cords (5). Install the remaining bottom bolt (3) .
Note: Soak cords (5) in a soap and water solution in order to aid in the installation of rubber cords (5) .
Show/hide table
Illustration 2 | g01336596 |
Show/hide table
Illustration 3 | g01336588 |
- Position cover (2) and install the washers and bolts (1). Tighten bolts (3) .
Note: Rotate the wheels six times in both directions after bogie assemblies (4) are attached to the frame.
- Adjust the track tension. Refer to Operation and Maintenance Manual, "Track (Rubber) - Inspect/Adjust".
Caterpillar Information System:
C7 Engines for Caterpillar Built Machines Injection Actuation Pressure Sensor
C4.4 Industrial Engine Air in Fuel - Test
770 and 772 Off-Highway Truck Prelubrication and High Speed Oil Change Prelubrication System
Software Activation for the AccuGrade® Display{7220, 7620} Software Activation for the AccuGrade® Display{7220, 7620}
773D Off-Highway Truck Capacities (Refill)
770 and 772 Off-Highway Truck Power Train System Information (Power Train)
277C, 277C2, 287C, 287C2 and 297C Multi Terrain Loaders Machine Systems Control Valve (Work Tool) - High Flow
EquipmentManager User Guide Fuel Results
D6K Track-Type Tractor Electrohydraulic Power Train Location of Electrical Components
Procedure to Improve Cold Starting Capability for 938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier{1000, 1456, 7000} Procedure to Improve Cold Starting Capability for 938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier{1000, 1456, 7000}
773D Off-Highway Truck Retarding
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Braking System Service Brake Discs - Check
770 and 772 Off-Highway Truck Power Train Specifications (Power Train)
"No GPS DATA (Right)" Message on AccuGrade® Systems{7220, 7490} "No GPS DATA (Right)" Message on AccuGrade® Systems{7220, 7490}
M313D, M315D, M315D Series 2, M315D2, M317D Series 2 and M317D2 Wheeled Excavators Machine System Specifications Control Valve (Brake)
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer Ether Starting Aid - Test
279C2 Compact Track Loader and 287C, 277C, 277C2 and 297C Multi Terrain Loaders Power Train Track Drive - Remove
279C2 Compact Track Loader and 287C, 277C, 277C2 and 297C Multi Terrain Loaders Power Train Track Drive - Install
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Power Train Track Drive - Disassemble
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Power Train Track Drive - Assemble
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 2688 - FMI 02
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 2687 - FMI 02
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 2685 - FMI 02
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 2685 - FMI 08