- Motor Grader:
- 120H (S/N: CAF1-UP)
- 12H (S/N: CBK1-UP; AMZ686-UP)
- 135H (S/N: CBC1-UP)
- 140H (S/N: CCA1-UP; APM2223-UP)
- 143H (S/N: APN662-UP)
- 14H (S/N: ASE1380-UP)
- 14M (S/N: B9J105-UP)
- 160H (S/N: ASD496-UP; CCP1-UP)
- 163H (S/N: ARL388-UP)
- 16H (S/N: ATS466-UP)
- 12H (S/N: CBK1-UP; AMZ686-UP)
- Track-Type Tractor:
- D3G (S/N: CFC1-UP; CFF1-UP; JMH1-UP; BYR1-UP)
- D4G (S/N: FDC1-UP; HYD1-UP; CFN1-UP; TLX1-UP)
- D5G (S/N: RKG1-UP; FDH1-UP; CLW1-UP; FDW1-UP)
- D5N (S/N: AKD1135-UP; AGG1335-UP; CFH300-UP; CKT400-UP)
- D6N (S/N: CBF300-UP; CCG400-UP; ALH735-UP; CBJ400-UP; CCK500-UP; CBL400-UP; AKM1235-UP; ALR635-UP; CCS400-UP; ALY1335-UP)
- D6R Series II (S/N: BNC378-UP; ADE646-UP; BRE501-UP; DAE181-UP; BNL501-UP; AFM140-UP; BPM104-UP; AEP435-UP; BLT259-UP; FDT324-UP; AAX797-UP; BMY409-UP; BPZ501-UP; BRZ501-UP)
- D6R Series III (S/N: GJB1-UP; WCB1-UP; HDC1-UP; RFC1-UP; TBC1-UP; HCD1-UP; HKE1-UP; WRG1-UP; MTJ1-UP; DMK1-UP; JDL1-UP; DLM1-UP; LFM1-UP; DPS1-UP; GMT1-UP; MRT1-UP)
- D7R (S/N: AEC1500-UP; ABJ1500-UP; AGN1500-UP)
- D8T (S/N: J8B1-UP; KPZ1-UP)
- D9T (S/N: RJS1-UP)
- D6T (S/N: JHB1-UP; DJG1-UP; WCG1-UP; WFH1-UP; KJL1-UP; SKL1-UP; LAY1-UP)
- D4G (S/N: FDC1-UP; HYD1-UP; CFN1-UP; TLX1-UP)
Introduction
The AccuGrade® Display must be registered by the dealer and activated by the dealer before the Display can be used. When you register the Display, you will receive a unique Registration Key that is used in order to activate the Display. This registration process will allow for Display to be upgraded as software upgrades are released.
Advanced options can also be applied to the AccuGrade System. The advanced options will require an additional Option Key. Wireless Support is an example of an advanced option.
A website is available for on-line support for the following options:
- Activating a new Display
- Activating advanced options on the Display
- Upgrading an existing Display
Additionally, you can call the following phone number for support:
- 888-223-7539
Important Safety Information
Work safely. Most accidents that involve product operation, maintenance, and repair are caused by failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs. A person must be alert to potential hazards. This person should also have the necessary training, skills, and tools in order to perform these functions properly. Safety precautions and warnings are provided in this instruction and on the product. If these hazard warnings are not heeded, "bodily" injury or death could occur to you or to other persons. Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard. The warnings in this publication and the warnings on the product are not all inclusive. If a tool, a procedure, a work method, or an operating technique that is not specifically recommended by Caterpillar is used, you must be satisfied of your safety and the safety of other people. You should also make sure that the product will not become damaged or unsafe by the operation, the lubrication, the maintenance, or repair procedures that are chosen by you.
Activating A New Display
Illustration 1 | g01345286 |
Example of the Registration Page |
Refer to the following Steps in order to obtain the Registration Key for activating a new Display.
- Record the serial number that is located on the identification plate on the Display.
- Go to the following website: "www.techproductregistration.com".
Refer to Illustration 1 for an example of the registration form.
Note: If access to the web site is not available, call 888-223-7539 in order to register the software manually.
- Complete the registration form that is found on the website.
Note: The web screen may need to refresh after entering information into the different fields.
- In the "Activity Type" field, select "PRODUCT REGISTRATION".
- In the "Reason" field, select "NEW SYSTEM".
Note: Select "Sys Recovery" if the software became corrupt after the first registration key was obtained. The system will generate the same registration key that was received for the initial installation.
- In the "Product Family" field, select "ACCUGRADE".
- In the "Model" field, select the appropriate Display.
- In the "Version" field, select the desired software version.
- In the "Display Serial Number" field, enter the serial number from your Display.
Note: Make sure that the serial number is entered exactly as the serial number is listed on the Display.
- In the "Order By Information" section, enter the following information:
- Your dealer code
- The the name of the person that is to receive the registration key
- The phone number of the person that is to receive the registration key
- The e-mail address of the person that is to receive the registration key
- Your dealer code
- In the "Customer Information" section, enter the following information: the company name of the customer, the contact name, the telephone number and the e-mail address.
- In the "Machine Model" field, enter the model of machine that the Display is being installed.
- In the "Machine Serial Number" field, enter the serial number of machine that the Display is being installed.
- When the data fields are complete, select "Submit" on web form.
You will be asked to review the data again. Additionally, you will be asked to confirm your input.
- Review the information.
- Select "Confirm".
Within 30 minutes. an email will be sent to the email address of the dealer that was submitted on the web form. This email will have the Registration Key number that is needed in order to activate the Display.
- Provide the Registration Key number to the appropriate person in order to enter the number into the Display.
Save this registration information for future reference.
Advance Option Key Registration
Advanced options may be available for the AccuGrade System. An example is Wireless Communication.
The Wireless Option provides the ability for the site manager to perform the following tasks:
- Transmit updated design information to the machines on site through a wireless signal
- Perform basic remote diagnostics
- Send simple test messages to the machines
After the Wireless Option has been purchased, the Wireless Option can be installed on the CD700 Display.
Option Key Purchase Procedure
- Refer to the appropriate AccuGrade price list in order to purchase the AccuGrade Option Key.
- Order the key per the instructions on the price list.
- Record the following information: the key reference number, the order dealer code and the order reference number.
- Record the serial number from the identification plate on the Display in order to have option activated.
- Go to the following website: www.techproductregistration.com or http://www.techproductregistration.com.
Note: If access to the website is not available, call 888-223-7539 for key administration.
- Complete the "Option Key Activation" form on the website.
- In "Activity Type" field select "OPTION KEY REGISTRATION"
- In the "Reason" field, select "NEW INSTALL"
Note: Select "SYS RECOVERY (TRANSFER)" when a Option Key has been purchased and needs to be transferred to a new Display due to display failure. This requires the dealer to call 888-223-7539.
Note: Select "SYS RECOVERY (Re-install)" when an Option Key has been purchased and needs to be reinstalled on the same Display due to corruption of the software.
- In the "Product Family" field, select "ACCUGRADE".
- In "System" field, select the model of the Display.
- In the "Version" field, select the latest version of software for the model of your Display.
- In the "Key Part Number" field, enter the Option Key Reference Number that was ordered.
- In the "Display Serial Number" field, enter the serial number from your Display.
Note: Make sure the serial number is entered exactly as listed on the Display.
- In the "Order Number" field, enter the order reference number.
- In "Order By Information" section, complete the following information:
- Select your dealer code.
- Enter the name of the person that is to receive the registration.
- Enter the phone number of the person that is to receive the registration.
- Enter the e-mail address of the person that is to receive the registration.
- Select your dealer code.
- In the "Customer Information" section, complete the following information:
- Enter the customer company name.
- Enter the contact name.
- Enter the phone number.
- Enter the email address.
- Enter the customer company name.
- In the "Machine Model" field, enter the model of the machine that has the Display that is installed.
- In the "Machine Serial Number" field, enter the serial number of the machine that has the Display that is installed.
- When data fields are complete, select "Submit" on web form.
You will be asked to review the data again. Additionally, you will be asked to confirm your input.
Review the information. If the information is correct, select "Confirm". If the information is not correct, select "Back". You can then edit your information.
Within 30 minutes an email will be sent to the dealer email address that was submitted on the web form. This email will have the option key number that will be used to activate the option on the Display that you are registering.
Upgrades
Upgrades may be available for the AccuGrade System.
Upgrade Purchase Procedure
Note: Some Upgrades are free and will not require the Upgrade Purchase Procedure.
- Refer to the appropriate AccuGrade price list in order to purchase the AccuGrade Upgrade.
- Order the upgrade per the instructions on the price list.
- Record the following information:
- The upgrade reference number
- The order dealer code
- And the order reference number
- The upgrade reference number
- Record the serial number from the identification plate on the Display in order to have option activated.
- Go to the following website:www.techproductregistration.com or http://www.techproductregistration.com
Note: If access to the website is not available, call 888-223-7539 for key administration.
- Complete the "Upgrades" form on the website.
- In "Activity Type" field select "Upgrades"
- In the "Reason" field, select "INSTALL UPGRADE"
Note: Select "SYS RECOVERY (TRANSFER)" when an Upgrade has been purchased and needs to be transferred to a new Display due to display failure. This requires the dealer to call 888-223-7539.
Note: Select "SYS RECOVERY (Re-install)" when an Upgrade has been purchased and needs to be reinstalled on the same Display due to corruption of the software.
- In the "Product Family" field, select "ACCUGRADE".
- In "System" field, select the model of the Display.
- In the "Version" field, select the latest version of software for the model of your Display.
- In the "Key Part Number" field, enter the Upgrade Number that was ordered.
- In the "Display Serial Number" field, enter the serial number from your Display.
Note: Make sure the serial number is entered exactly as listed on the Display.
- In the "Order Number" field, enter the order reference number.
- In "Order By Information" section, complete the following information:
- Select your dealer code.
- Enter the name of the person that is to receive the registration.
- Enter the phone number of the person that is to receive the registration.
- Enter the e-mail address of the person that is to receive the registration.
- Select your dealer code.
- In the "Customer Information" section, complete the following information:
- Enter the customer company name.
- Enter the contact name.
- Enter the phone number.
- Enter the e-mail address.
- Enter the customer company name.
- In the "Machine Model" field, enter the model of the machine that has the Display that is installed.
- In the "Machine Serial Number" field, enter the serial number of the machine that has the Display that is installed.
- When data fields are complete, select "Submit" on web form.
You will be asked to review the data again. Additionally, you will be asked to confirm your input. Review the information. If the information is correct, select "Confirm". If the information is not correct, select "Back". You can then edit your information.
Within 30 minutes an e-mail will be sent to the dealer e-mail address that was submitted on the web form. This e-mail will have the upgrade number that will be used to activate the option on the Display that you are registering.
Procedure for Entering the Registration Key into the 244-1716 Display
Illustration 2 | g01265962 |
(1) LCD (2) Soft Key Labels (3) Soft Keys (4) Escape Key (5 ) Next Key (6) Power Key (7) "+" Key (8) Arrow Keys (9) "-" Key (10) "OK" Key (11) Menu Key (12) "Data Card Slot" |
- Power system up in Service Mode by turning machine key to "ON" position,
Press and hold the "OK" Key (10) while pressing the Power Key (6) .
- Press the Menu Key (11)
"Setup Menu" appears in the Soft Key Labels.
Illustration 3 | g01345600 |
- Press the "Setup Menu" Key.
- Press the "Installation"Key.
- Use the Arrow Keys (8) in order to select "Software Support Option".
- Press the "OK" Key (10) .
- Perform one of the two options below:
- Copy the Option key file obtained above "Option key serial number.txt" to the root folder of a data card. Insert the Data Card into the Display. The Display will read the key.
- Enter the 24 character option key that was obtained above. To perform this task, use the Arrow Keys on the keypad of the Display. Press the "OK" Key (10). If successful, the "Option Keys File Loaded" dialog appears. This indicates that one option key has been loaded successfully.
- Copy the Option key file obtained above "Option key serial number.txt" to the root folder of a data card. Insert the Data Card into the Display. The Display will read the key.
- Press the "OK" Key (10) .
The Plan View appears.
Illustration 4 | g01313129 |
- An invoice will be sent from Antares for the purchase of the option key.
If the key does not activate check the following information:
- Verify that the key was entered correctly
- Verify that the serial number located on the identification plate is the same as the electronic serial number
- Verify that the key was entered correctly
Procedure for Entering the Registration Key into the 283-9530 Display
Illustration 5 | g01301367 |
Display (1) Arrow Keys (2) Liquid Crystal Display (LCD) (3) Elevation Select Key (4) Increment/Blade Slope Direction Key (5) Manual Key (6) Menu Key (7) "Esc" Left Reset/Left Bench Key (8) "OK" Right Reset/Right Bench key (9) Grade Indicators |
- Power system up by turning machine key to the "ON" position
- Press the Menu key (6) .
- Use the Arrow Keys (1) in order to select "Advanced Option" from the "Configuration" menu.
Illustration 6 | g01311346 |
- Press the OK/Right Reset (8). Screen similar to Illustration 7.
- Use the Arrow Keys (1) in order to select "Service Agreement Password" from the "Advanced Option"menu.
Illustration 7 | g01311348 |
- Press the OK/right reset key (8) .
- Enter the registration key that was obtained earlier by performing the following:
- Use the Arrow keys (1) in order to select the appropriate alpha or numeric character.
- Use the Increment key (4) in order to select the next digit in the key.
Illustration 8 | g01311354 |
- Press the OK/Right Reset key (8) in order to accept the Registration key.
Note: If the key does not activate check the following:
- Verify that the key was entered correctly
- Verify that the serial number located on the identification plate is the same as the electronic serial number