Pressure Switch (Oil Filter Bypass)
Show/hide table
Illustration 1 | g03530661 |
Show/hide table
Specification for 253-2673 Pressure Switch Gp | |||
Item | Qty | Part | Specification Description |
1 | - | - | Final installation torque is |
Caterpillar Information System:
Starting and Charging Systems Test Setup A, Hookup
CB-534D and CB-564D Asphalt Compactors Sound Information and Vibration Information
Starting and Charging Systems Basic Operation
Starting and Charging Systems Specifications
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer Throttle Switch Circuit - Test
3508 EUI Engine for Off-Highway Truck/Tractors Engine Support
2006/11/27 A High Capacity Oil Filter for the Output Transfer Gear Is Used {3004, 3067, 3154}
2006/09/11 A High Capacity Oil Filter for the Output Transfer Gear Is Used {3016, 3264}
Tier 1 Level Emssions Engine Repower for a 777C Off Highway Truck {1000} Tier 1 Level Emssions Engine Repower for a 777C Off Highway Truck {1000}
2006/06/19 New Radiator and Aftercooler Gp Now Used {1353}
793D Off-Highway Truck Power Train Axle Shaft - Install
793D Off-Highway Truck Power Train Axle Shaft - Remove
Starting and Charging Systems Test Step B, Crank
Machine Start Switch Key May Not Fit Properly{1416} Machine Start Switch Key May Not Fit Properly{1416}
2007/04/30 A New Valve Improves the Service Life of the Circle Drive Motors {5057, 5082, 5207}
Starting and Charging Systems Test Step C, Start Aid
Starting and Charging Systems Test Step D, High Idle
R1700G Load Haul Dump Brake Release - If Equipped
R1600G Load Haul Dump Steering System Diverter Valve (Steering Release)
R1700G Load Haul Dump Steering System Diverter Valve (Steering Release)
Starting and Charging Systems Troubleshooting
Installing a Ride Control Kit{1408, 5004, 5057, 5077} Installing a Ride Control Kit{1408, 5004, 5057, 5077}
Starting and Charging Systems Test Considerations
793D Off-Highway Truck Power Train Tire and Rim (Rear) - Remove