Piston Motor (Front Propel) - Install
Installation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 4C-9507 | Retaining Compound | 1 |
| B | 8T-5096 | Dial Indicator Gp | 1 |
- Apply Tooling (A) to axle (24) .
Show/hide table
 | |
| Illustration 1 | g01244938 |
- Lower the temperature of bearings (23). Install the upper and lower bearing (23) in axle (24) .
Show/hide table
 | |
| Illustration 2 | g01244710 |
- Attach a suitable lifting device to housing (13) and planetary (19). Install the shims, axle pin (17), and bolts (15). Install the axle pin and the bolts in the bottom of housing (13). Place Tooling (B) on the axle, as shown. Use a suitable pry bar and move housing (13) up and down. Add or subtract the shims in order to achieve a 2.29 ± 0.76 mm (0.090 ± 0.030 inch) distance between the axle and housing (13). The weight of planetary (19), housing (13) and the piston motor is approximately 390 kg (859 lb).
Show/hide table
 | |
| Illustration 3 | g01244952 |
- Remove two bolts (15). Install bracket (16) and bolts (15) .
Show/hide table
 | |
| Illustration 4 | g01245158 |
- Connect hose assemblies (18) to the piston motor.
- Install steering link group (14) in housing (13). Install nut (12) and cotter pin (11) on steering link group (14) .
Show/hide table
 | |
| Illustration 5 | g01245377 |
- Reposition hydraulic cylinder (10). Install pin assembly (9) and bolt (8) .
- Connect hose assembly (7) .
Show/hide table
 | |
| Illustration 6 | g01245387 |
- Install bracket (6) and bolts (5) .
Show/hide table
 | |
| Illustration 7 | g01245390 |
- Connect harness assembly (4) .
- Connect hose assembly (3) .
Show/hide table
 | |
| Illustration 8 | g01245391 |
- Install cover (1) and bolts (2) .
- Fill the hydraulic oil tank with hydraulic oil. Refer to Operation and Maintenance Manual for the correct procedure.
End By: Install the tire and rim (front). Refer to Disassembly and Assembly, "Tire and Rim (Front) - Remove and Install".
Caterpillar Information System:
RM-300 Reclaimer Mixer Power Train Piston Motor (Front Propel) - Remove
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer E363 High Fuel Supply Temperature
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2150 - FMI 03
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 1471 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 1471 - FMI 04
587T Pipelayer Hydraulic System Oil Level - Check
572R Series 2, 583T, 587T, PL83 and PL87 Pipelayers Event Code List
793F and 793F CMD Off-Highway Truck Power Train Modulating Valve (Transmission Hydraulic Control)
C7 Engines for Caterpillar Built Machines Vibration Damper
587R Pipelayer Hydraulic System Oil - Change
24M Motor Grader Machine Systems Lubrication Injectors - Check and Adjust
R1300G Series II Load Haul Dump Machine Systems Solenoid Valve (Ride Control, Rod End) - Remove and Install
R1700G Load Haul Dump C11 Engine Supplement Radiator Tank (Header) - Remove
R1700G Load Haul Dump C11 Engine Supplement Radiator Tank (Header) - Install
R1300G Series II Load Haul Dump Indicators and Gauges - Test
R1700G Load Haul Dump Power Train General Information
R1700G Load Haul Dump C11 Engine Supplement Radiator - Remove
R1700G Load Haul Dump C11 Engine Supplement Radiator - Install
R1700G Load Haul Dump Power Train Power Train Electronic Control System
R1300G Series II Load Haul Dump Hydraulic System Main Control Valve
2006/02/20 An Improved Plate ( Reaction) Is Available for the Transmission {3160}
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2150 - FMI 04
777E and 777F Off-Highway Truck Power Train Torque Converter and Transmission Pressure Chart