Control Valve (Wheel Steering) - Disassemble
Disassembly Procedure
Start By:
- Remove the steering control valve. Refer to Disassembly and Assembly, "Control Valve (Wheel Steering) - Remove".
- Remove four bolts (2) and cover (1) from the steering control valve.
Show/hide table
Illustration 1 | g01107608 |
- Remove plug (6), shims (5), spring (4), and check valve (3) from the cover.
Show/hide table
Illustration 2 | g01107609 |
- Remove the O-ring seal from plug (6) .
- Remove seat (9) and O-ring seals (7) and (8) from the cover.
Show/hide table
Illustration 3 | g01107610 |
- Remove O-ring seal (10) from seat (9) .
- Remove spool assembly (11) from the steering control valve.
Show/hide table
Illustration 4 | g01107611 |
- Remove bolt (15), the washer, retainer (18), spring (14), spacer (17), retainer (13), and shims (16) from spool (12) .
Show/hide table
Illustration 5 | g01107612 |
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
- Remove springs (19) from the steering control valve.
Show/hide table
Illustration 6 | g01107613 |
- Remove valve spool (21) from the steering control valve.
Show/hide table
Illustration 7 | g01107614 |
- Remove shims (20) from valve spool (21) .
- Remove plug (24), seat (23), ball (25), and seat (22) from the steering control valve.
Show/hide table
Illustration 8 | g01107615 |
- Remove the O-ring seals from plug (24), seat (23), and seat (22) .
- Remove plug assembly (26) from the steering control valve.
Show/hide table
Illustration 9 | g01107616 |
- Remove the O-ring seal from plug assembly (26) .
Caterpillar Information System:
R1600G Load Haul Dump Machine Systems System Pressure - Release
R1600G Load Haul Dump Machine Systems Steering Metering Pump - Install
R1600G Load Haul Dump Machine Systems Steering Metering Pump - Remove
R1600G Load Haul Dump Machine Systems Pilot Control Valve - Install
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System MID 082 - CID 2328 - FMI 06
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System MID 082 - CID 2328 - FMI 05
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System MID 082 - CID 2328 - FMI 03
416E, 420E and 430E Backhoe Loaders Hydraulic and Steering System Control Valve (Backhoe Bucket)(Mechanically Operated)
541, 551 and 552 Track Feller Bunchers Machine Systems Solenoid Valve and Manifold (Disc Saw)
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System MID 082 - CID 2326 - FMI 06
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System MID 082 - CID 2326 - FMI 05
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System MID 082 - CID 2326 - FMI 03
R1600G Load Haul Dump Machine Systems Control Valve (Wheel Steering) - Assemble
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Customer Specified Parameters Table
Installing the 258-3915, 294-5580 Work Tool Positioner Kit (SELF-LEVELING HYDRAULICS){1435, 5057, 5112, 5264, 5479} Installing the 258-3915, 294-5580 Work Tool Positioner Kit (SELF-LEVELING HYDRAULICS){1435, 5057, 5112, 5264, 5479}
Installing the 258-4127 Work Tool Wiring Kit {1408} Installing the 258-4127 Work Tool Wiring Kit {1408}
3500 Engines for Caterpillar Built Machines Turbocharger
793D Off-Highway Truck Power Train Gear Pump (Rear Axle Oil)
416E, 420E and 430E Backhoe Loaders Hydraulic and Steering System Control Valve (Swing)(Mechanically Operated)
AP1055D and BG2455D Asphalt Pavers Engine Supplement Gear Pump (Fan Drive) - Remove
AP1000D and BG260D Asphalt Pavers Engine Supplement Control Valve (Fan Drive) - Remove and Install
AP1000D and BG260D Asphalt Pavers Engine Supplement Fan - Remove and Install
416E, 420E and 430E Backhoe Loaders Hydraulic and Steering System Control Valve (Boom)(Mechanically Operated)
3500 Engines for Caterpillar Built Machines Turbocharger