14M and 16M Motor Graders Machine Systems Caterpillar


Blade Lift

Usage:

16M B9H



图 1g01192430

(1) 螺栓的扭矩 ... 115 ± 10 N·m (85 ± 7 lb ft)

(2) 8D-3251 垫圈

一个垫圈的厚度 ... 1.22 mm (0.048 in)

(3) 8D-3252 垫圈

一个垫圈的厚度 ... 0.76 mm (0.030 in)



图 2g01192703

(4) 265-6718 垫片

1 个垫片的厚度 ... 0.13 mm (0.005 in)

(5) 265-6719 垫片

1 个垫片的厚度 ... 0.25 mm (0.010 in)

(6) 265-6720 垫片

1 个垫片的厚度 ... 0.5 mm (0.02 in)

Caterpillar Information System:

793D Off-Highway Truck Steering System Piston Pump (Steering)
793D Off-Highway Truck Power Train Transfer Gears
RM-300 Reclaimer Mixer Machine Systems Electrical System (Auxiliary Hydraulic)
793F and 793F CMD Off-Highway Truck Braking System Gear Pump (Brake Cooling)
RM-300 Reclaimer Mixer Machine Systems Operator Controls (Rotor Drive System)
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Power Train Torque Converter and Transmission Pressures
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System Switches
966H Wheel Loader and 972H Wheel Loader Power Train Backup Alarm Always Off
966H Wheel Loader and 972H Wheel Loader Power Train Backup Alarm Always On
730 EJECTOR and 740 EJECTOR Articulated Trucks Ejector Blade Carriage - Install
730 EJECTOR and 740 EJECTOR Articulated Trucks Ejector Blade Carriage - Remove
966H Wheel Loader and 972H Wheel Loader Power Train Using Caterpillar Monitoring System to Determine Diagnostic Codes
2006/11/20 New Service Parts are Available for Hydraulic Motors on Cold Planers and Wheel Saws {5058, 7000}
730 EJECTOR and 740 EJECTOR Articulated Trucks Ejector Cylinder Mounting Group - Remove
730 EJECTOR and 740 EJECTOR Articulated Trucks Ejector Cylinder Mounting Group - Install
RM-300 Reclaimer Mixer Machine Systems Position Sensor (Rotor Depth, Front Steering, and Rear Steering)
14M and 16M Motor Graders Machine Systems Drawbar
14M and 16M Motor Graders Hydraulic and Steering System Control Valve (Blade Tip)
RM-300 Reclaimer Mixer Machine Systems Metering Pump (Steering)
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Auxiliary) - Assemble
24M Motor Grader Hydraulic and Steering System Control Valve (Ripper)
966H Wheel Loader and 972H Wheel Loader Steering System Steering System Troubleshooting
RM-300 Reclaimer Mixer Machine Systems Control Valve (Front Auxiliary Manifold)
R1600G Load Haul Dump Machine Systems Solenoid Valve (Lift Arm Positioner) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.