Crankshaft Vibration Damper and Pulley - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | -     | 导向螺栓 (5/8 - 18 NF)- 6 in     |
1     |
B     | 6V-4876     | 润滑剂     | 1     |
- 拆下皮带。 请参阅操作和保养手册, "皮带 - 检查 / 调整 / 更换"。
- 拆下固定软管组件 (3) 的夹子(未显示)。 拆下螺栓 (1) 后,将机油滤清器组件 (2) 定位到侧面上。
Show/hide table
图 1 | g01175913 |
- 拆下螺栓 (4) ,然后从减振器 (6) 上拆下皮带轮 (5) 。
Show/hide table
图 2 | g01175920 |
- 从减振器 (6) 上拆下顶部螺栓 (7) 。 将工具 (A) 安装到螺栓的位置。 拆下螺栓 (7) 和减振器 (6) 。
Show/hide table
图 3 | g01175939 |
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | -     | 导向螺栓 (5/8 - 18 NF)- 6 in     |
1     |
B     | 6V-4876     | 润滑剂     | 1     |
- 将工具 (A) 安装到顶部螺栓 (7) 的孔中。 将工具 (B) 置于螺栓 (7) 上。 安装减振器 (6) 和螺栓 (7) 。 拆下工具 (A) ,安装用于减振器 (6) 的顶部螺栓 (7) 。
Show/hide table
图 4 | g01175939 |
- 将皮带轮 (5) 安装在减振器 (6) 上。 安装螺栓 (4) 。
Show/hide table
图 5 | g01175920 |
- 定位机油滤清器组件 (2) ,然后安装螺栓 (1) 。 安装用于固定软管组件 (3) 的夹子(未显示)。
Show/hide table
图 6 | g01175913 |
- 安装皮带。 请参阅操作和保养手册, "皮带 - 检查 / 调整 / 更换"。
Caterpillar Information System:
2005/06/06 Proper Operation of the Variable Frequency Controller on the Soil Compactors {5258}
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders C7 Engine Supplement Radiator - Install
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders C7 Engine Supplement Radiator - Remove
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders C7 Engine Supplement Aftercooler Core - Remove and Install
TH220B, TH330B and TH340B Telehandlers Machine Systems Drive and Steering Axle (Rear)
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 1788 - FMI 02
735, 740 and 740 EJECTOR Articulated Trucks Engine Supplement Hydraulic Oil Cooler - Remove and Install
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders C7 Engine Supplement Gear Motor (Hydraulic Fan) - Install
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders C7 Engine Supplement Gear Motor (Hydraulic Fan) - Remove
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders C7 Engine Supplement Fan Group - Install
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders C7 Engine Supplement Fan Group - Remove
735, 740 and 740 EJECTOR Articulated Trucks Engine Supplement Transmission Oil Cooler - Remove and Install
C9 Engine for Caterpillar Built Machines Fan Drive - Remove
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 1789 - FMI 02
AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope) Avoidance Zone - Set
AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope) Beeper - Set
C9 Engine for Caterpillar Built Machines Fan Drive - Disassemble
AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope) Blade Wear - Set
AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope) Brightness (Display and Light Bar) - Set
AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope) Diagnostics - View
Repair Procedure for Retainer Assemblies on Track Idlers and Rollers {4159, 4180} Repair Procedure for Retainer Assemblies on Track Idlers and Rollers {4159, 4180}
AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope) GPS Accuracy Mode - Set
AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope) Light Bar Scale - Set
AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope) Map Recording - Set