Radiator - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7573     | Link Bracket     | 1     |
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
- Use Tooling (A) and a suitable lifting device to position radiator (7) into position. The weight of radiator (7) is approximately 45 kg (100 lb).
Show/hide table
Illustration 1 | g01175977 |
Show/hide table
Illustration 2 | g01175978 |
- Install bolts (8) .
- Install angle assembly (6) and bolts (5) .
Show/hide table
Illustration 3 | g01175892 |
- Install bracket assembly (3) and support assembly (4) .
Show/hide table
Illustration 4 | g01175890 |
- Install angle assembly (2) and bolts (1) .
Show/hide table
Illustration 5 | g01175888 |
End By: Install the fan group. Refer to Disassembly and Assembly, "Fan Group - Install".
Caterpillar Information System:
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders C7 Engine Supplement Radiator - Remove
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders C7 Engine Supplement Aftercooler Core - Remove and Install
TH220B, TH330B and TH340B Telehandlers Machine Systems Drive and Steering Axle (Rear)
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 1788 - FMI 02
735, 740 and 740 EJECTOR Articulated Trucks Engine Supplement Hydraulic Oil Cooler - Remove and Install
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders C7 Engine Supplement Gear Motor (Hydraulic Fan) - Install
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders C7 Engine Supplement Gear Motor (Hydraulic Fan) - Remove
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders C7 Engine Supplement Fan Group - Install
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders C7 Engine Supplement Fan Group - Remove
735, 740 and 740 EJECTOR Articulated Trucks Engine Supplement Transmission Oil Cooler - Remove and Install
735, 740 and 740 EJECTOR Articulated Trucks Engine Supplement Transmission Oil Cooler - Remove and Install
735, 740 and 740 EJECTOR Articulated Trucks Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
2005/06/06 Proper Operation of the Variable Frequency Controller on the Soil Compactors {5258}
735, 740 and 740 EJECTOR Articulated Trucks Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install
C9 Engine for Caterpillar Built Machines Fan Drive - Remove
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 1789 - FMI 02
AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope) Avoidance Zone - Set
AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope) Beeper - Set
C9 Engine for Caterpillar Built Machines Fan Drive - Disassemble
AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope) Blade Wear - Set
AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope) Brightness (Display and Light Bar) - Set
AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope) Diagnostics - View
Repair Procedure for Retainer Assemblies on Track Idlers and Rollers {4159, 4180} Repair Procedure for Retainer Assemblies on Track Idlers and Rollers {4159, 4180}
AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope) GPS Accuracy Mode - Set