Piston Pump (Steering)
Show/hide table
Illustration 1 | g02673636 |
Show/hide table
Illustration 2 | g02673657 |
Show/hide table
Specification for 241-9299 Piston Pump Gp     | |||
Item     | Qty     | Part     | Specification Description     |
The rotation of the shaft is counterclockwise when the rotation of the shaft is viewed from the drive end.     | |||
The steering pump is a load sensing variable displacement piston pump.     | |||
1     | 1     | 6E-4224 Swashplate Plug     | Torque to 101.5 ± 4.5 N·m (74.9 ± 3.3 lb ft).     |
2     | 1     | 9T-1699 Spring     | Length under test force is 11.1 mm (0.44 inch).     |
Test force is 32.60 ± 3.11 N (7.33 ± 0.70 lb). |
|||
Free length after test is 17.17 mm (0.676 inch). |
|||
3     | 2     | 3E-4302 Flat Head Screw     | Torque to 4.0 ± 0.4 N·m (35.4 ± 3.5 lb in).     |
4     | 3     | 6V-8214 Bolt     | Torque to 8.5 ± 1.0 N·m (75.2 ± 8.9 lb in).     |
5     | 1     | 9S-4185 O-Ring Plug     | Torque to 57 ± 3 N·m (42 ± 2 lb ft).     |
6     | 4     | 6V-8337 Bolt     | Torque to 34 ± 3 N·m (301 ± 27 lb in).     |
7     | 2     | 259-7060 Stud     | Torque to 70 ± 7 N·m (52 ± 5 lb ft).     |
8     | 2     | 6V-8004 Bolt     | Torque to 70 ± 7 N·m (52 ± 5 lb ft).     |
9     | 2     | 8T-0372 Bolt     | Torque to 70 ± 7 N·m (52 ± 5 lb ft).     |
Show/hide table
Illustration 3 | g02673757 |
Section C-C |
Show/hide table
Specification for 241-9299 Piston Pump Gp     | |||
Item     | Qty     | Part     | Specification Description     |
10     | 1     | 6E-6599 Bias Piston Kit     | Apply blue Loctite 242 to the threads.     |
Torque to 79 ± 4 N·m (58 ± 3 lb ft). |
|||
11     | 1     | 6E-6600 Bias Spring     | Free length is 92.0 mm (3.62 inch).     |
12     | 1     | 9T-2197 Shim Pack     | The 9T-2197 Shim Pack consists of 17 shims of various thicknesses.     |
Use shims as required in order to attain an axial shaft end play of 0.010 to 0.100 mm (0.0004 to 0.0039 inch). |
|||
13     |
1     |
6E-6602 Piston Control Kit     |
Apply blue Loctite 242 to the threads.     |
Torque to 79 ± 4 N·m (58 ± 3 lb ft). |
|||
14     | 2     | 3E-7417 Plug     | Torque to 12.85 ± 0.15 N·m (113.73 ± 1.33 lb in).     |
Pressure and Flow Compensator Valve
Show/hide table
Illustration 4 | g02674058 |
Top view |
Show/hide table
Illustration 5 | g02673957 |
Section D-D |
Show/hide table
Specification for 260-0411 Pump Control Valve Gp     | |||
Item     | Qty     | Part     | Specification Description     |
15     | 1     | 9S-4191 O-Ring Plug     | Torque to 30.5 ± 1.5 N·m (269.9 ± 13.3 lb in).     |
16     | 1     | 6E-6141 Sealing Locknut     | Torque to 79 ± 4 N·m (58 ± 3 lb ft).     |
17     | 1     | 6E-6142 Margin Plug     | Torque to 79 ± 4 N·m (58 ± 3 lb ft).     |
18     | 1     | 6E-4246 Margin Spring     | Free length after test is 38.1 mm (1.50 inch).     |
19     | 2     | 9T-2186 Plug     | Torque to 30.5 ± 1.5 N·m (269.9 ± 13.3 lb in).     |
20     | 1     | 6E-6141 Sealing Locknut     | Torque to 17 ± 3 N·m (150 ± 27 lb in).     |
21     | 1     | 6E-6140 Compensator Plug     | Torque to 101.5 ± 4.5 N·m (74.9 ± 3.3 lb ft).     |
22     | 1     | 6E-4228 Spring     | Length under test force is 44.7 mm (1.76 inch).     |
Test force is 871.27 ± 1.00 N (195.87 ± 0.22 lb). |
|||
Free length after test is 57.15 mm (2.250 inch). |
6E-6571 Pump Rotating Gp
Show/hide table
Illustration 6 | g02674038 |
Show/hide table
Specification for 6E-6571 Pump Rotating Gp     | |||
Item     | Qty     | Part     | Specification Description     |
23     | 4     | 3T-0849 Bolt     | Apply blue Loctite 242 to the threads.     |
Torque to 14 ± 1 N·m (124 ± 9 lb in). |
Caterpillar Information System:
TH220B, TH330B and TH340B Telehandlers Machine Systems Boom Cylinder
PL1000E Communication ECM Electronic Control Module (ECM) - Replace
TH220B, TH330B and TH340B Telehandlers Machine Systems Boom Cylinder
AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope) Automatic Control System
PL1000E Communication ECM Electronic Control Module (ECM) - Flash Program
TH220B, TH330B and TH340B Telehandlers Machine Systems Boom Cylinder
TH210 and TH215 Telehandlers Machine Systems Boom Cylinder - Remove and Install
735, 740 and 740 EJECTOR Articulated Trucks Engine Supplement Radiator Guard - Install
735, 740 and 740 EJECTOR Articulated Trucks Engine Supplement Radiator Guard - Remove
735, 740 and 740 EJECTOR Articulated Trucks Engine Supplement Radiator - Remove
735, 740 and 740 EJECTOR Articulated Trucks Engine Supplement Aftercooler, Fan, and Gear Motor - Install
2005/05/30 The Parking Brake Control Group Has Been Updated with an Updated Plate, Updated Plate Assembly and New Specifications Which Improve Reliability {4282, 4284}
TH210 and TH215 Telehandlers Machine Systems Compensating Cylinder - Remove and Install
Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070}
793D Off-Highway Truck/Tractor Air/Hydraulic Cylinder (Front Brake) - Remove
793D Off-Highway Truck/Tractor Air/Hydraulic Cylinder (Rear Brake) - Remove
2005/06/06 Special Instruction, REHS2624 , "Instructions for Converting Hot Saw to Intermittent Saw " Is Available {5051, 5051, 5057, 6543}
CB-434D, CB-534D, CB-534D Series XW and CB-564D Paving Compactors Traction Control System
TH210 and TH215 Telehandlers Machine Systems Boom - Remove
C9 Engine for Caterpillar Built Machines Engine Oil Pan - Remove and Install
793D Off-Highway Truck/Tractor Door Panel (Left) - Remove and Install
793D Off-Highway Truck/Tractor Door Panel (Right) - Remove and Install
TH210 and TH215 Telehandlers Machine Systems Boom - Install
TH210 and TH215 Telehandlers Power Train Hydrostatic Drive Motor - Remove