 | |
| Illustration 1 | g01174014 |
Cylinder stroke ... 1042 mm (41.0 inch)
(1) Torque setting for self-locking nut ... 3000 ± 100 N·m (2213 ± 74 lb ft)
Lubricate the threads of the self-locking nut with clean grease.
(2A) Diameter of piston ... 99.55 ± 0.03 mm (3.919 ± 0.001 inch)
(2B) Bore of piston ... 44.465 ± 0.025 mm (1.7506 ± 0.0010 inch)
(3) Bore of cylinder ... 100 ± 0.08 mm (3.937 ± 0.003 inch)
(4) Diameter of piston rod ... 69.950 ± 0.038 mm (2.7539 ± 0.0015 inch)
(5) Bore of head ... 70.33 ± 0.03 mm (2.7689 ± 0.0012 inch)
(6) Torque setting for the head ... 600 ± 130 N·m (440 ± 95 lb ft)
Lubricate the threads of the head with clean grease.
Apply sealant to wiper seal groove (7) prior to assembly.
Note: Lubricate all of the seals with clean lubricant that is being sealed.
(8) 216-8560 Sleeve Bearing
- Diameter ... 73.165 ± 0.025 mm (2.8805 ± 0.0010 inch)
- Bore ... 60.315 ± 0.025 mm (2.3746 ± 0.0010 inch)
(9) 193-3865 Bearing
- Diameter ... 89.9925 ± 0.0075 mm (3.5430 ± 0.0003 inch)
- Bore ... 59.9925 ± 0.0075 mm (2.3619 ± 0.0003 inch)
Note: Secure the bearing with 185-3994 Bearing Mount Compound.